We are not the manufacturer, authorised distributor or authorised representative of the Wenglor brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Wenglor ZW200PCT3, reach FAMAGA, the world's key company of industrialized equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of spare parts and particular attention to each orderer. We appreciate everyone, who cooperated with us - hence, our regular customers pick up the most helpful purchase conditions and discounts on the industrial equipment market. At this time, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Syria, Sri Lanka, Luxembourg, South Korea, Bahamas, Chad, Liberia, Dominican Republic, Mongolia, Kenya, Tajikistan, Nigeria, South Sudan, Gambia, Georgia, Zambia, Mozambique, Romania, Jamaica, Croatia, Japan, Brunei, Israel, Nicaragua, The Bahamas, Samoa, Egypt, Angola, Dominica, Suriname, Costa Rica, The Gambia, United Arab Emirates, Ukraine, Qatar, Australia, Panama, Andorra, Comoros, Poland, East Timor, Brazil, Djibouti, North Korea. A advanced logistics link and a partnership network allow us to send our units anywhere in the globe with no delay without undermining product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this amount is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or write to the online chat on our site. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Range | 20000 mm |
Smallest Recognizable Part | 250 µm |
Switching Hysteresis | < 15 % |
Light Source | Laser (red) |
Service Life (T = +25 °C) | 100000 h |
Laser Class (EN 60825-1) | 2 |
Max. Ambient Light | 10000 Lux |
Opening Angle | 12 ° |
Sensor Type | Receiver |
Supply Voltage | 10...30 V DC |
Current Consumption (Ub = 24 V) | < 15 mA |
Switching Frequency | 3 kHz |
Response Time | 166 µs |
On-/Off-Delay (RS-232) | 0...5 s |
Temperature Drift | < 10 % |
Temperature Range | -25...60 °C |
Switching Output Voltage Drop | < 2,5 V |
Switching Output/Switching Current | 200 mA |
Short Circuit and Overload Protection | yes |
Reverse Polarity Protection | yes |
Lockable | yes |
Teach Mode | NT, MT |
Protection Class | III |
Setting Method | Teach-In |
Housing Material | Stainless Steel |
Full Encapsulation | yes |
Degree of Protection | IP67 |
Connection | M12 ? 1, 4-pin |
MTTFd (EN ISO 13849-1) | 2385,27 a |
PNP NO/NC switchable | yes |
RS-232 with Adapterbox | yes |