Wenglor LM89PCT2
  Wenglor LM89PCT2

We are not the manufacturer, authorised distributor or authorised representative of the Wenglor brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

LM89PCT2 Wenglor

Manufacturer

Wenglor

Country

Germany

Part number

LM89PCT2

Description

Retro-Reflex Sensor Range UB10...30 V DC 6500mm PNP 200mA

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications LM89PCT2

If you are questing Wenglor LM89PCT2, contact FAMAGA, the world's foremost vendor of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of products and private attention to each consumer. We esteem everyone, who collaborated with us - so, our regular buyers pick up the most desirable purchase conditions and discounts on the industrial equipment market. At this time, there are more than 3500 such purchasers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA operates all over the planet . A well-elaborated logistics network and a partnership network guide us to send our units anywhere in the globe on-time without damaging product quality.

A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of factory-made equipment.

All goods from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is rising every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.

To ask a question or place an order, contact us or send a message to the online chat on our site. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features LM89PCT2

  • Low-cost
  • Teach-in, external teach-in
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
Range 6500 mm
Reference Reflector/Reflector Foil RQ100BA
Switching Hysteresis < 5 %
Light Source Red Light
Wavelength 660 nm
Polarization Filter yes
Service Life (T = +25 °C) 100000 h
Max. Ambient Light 10000 Lux
Opening Angle 5 °
Two-Lens Optic yes
Electrical Data
Supply Voltage 10...30 V DC
Current Consumption (Ub = 24 V) < 40 mA
Switching Frequency 2 kHz
Response Time 250 µs
On-/Off-Delay (RS-232) 0...5 s
Temperature Drift < 5 %
Temperature Range -25...60 °C
Switching Output Voltage Drop < 2,5 V
PNP Switching Output/Switching Current 200 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Teach Mode NT, MT
Protection Class III
Mechanical Data
Setting Method Teach-In
Housing Material Plastic
Full Encapsulation yes
Degree of Protection IP67
Connection M12 ? 1, 4-pin
Output
PNP NO/NC switchable yes
RS-232 with Adapterbox yes