SN 300 SA Tecnofluid Sawing machine

2 Speed Three-phase (V 400 – 50 Hz, other voltages upon request) All main machine components are in cast iron. Very robust structure reduces noise level and vibrations during cutting cycle. Motor is in vertical position to reduce dimensions at rear, the transmission is made by means of a worm drive gearbox in oil bath (1:40 ratio). Large circular support base: it offers an ample surface to support piece during cutting cycle and allows to reach a high grade of precision in cutting perpendicularity. It rotates over a tempered ball track giving maximum smoothness during rotation. Adjustable bow position by means of a key on eccentric bushing for 90° cuts, by means of mechanical stops at 45° right & 45-60° left. Blade guides: they drive the blade sliding by means of widia hard metal plaques with bearings on eccentric bushings. Hydraulic cylinder for adjustable vice motion. It can be positioned lengthwise along the entire machine base. Vice features: rapid closing, closing hand wheel, flat adjustable gib plate. Retractable and adjustable vice shoulders. Pushing back the retractable vice shoulder, it is possible to reach the maximum cutting capacity (330 x 150 mm, at 90°). The adjustable vice shoulder allow always to obtain a precise alignment. Blade tightening device: this is the best solution for a constant and uniform blade tension. Blade lubrication cooling system with electric pump and two adjustable taps placed on blade guides. Control panel located in an easily accessible position. Blade start switch with “man present” guard. The safety switch for blade drive is guarded by a cover against accidental start-up. It works in low voltage. Drive pedal for semiautomatic cutting cycle. The hinged bow is moved on a support with conical bearings. Double emergency push button located in front of the machine frame for greater safety in case of need. Electronic safety sensor to stop blade motion in case of slippaging or breakage of the same. Accessories on request: Laser cutting indicator Clamp pressure regulator Micromist lubrication Vertical anti-burr clamp Electronic speed variator Loading & unloading conveyors