We are not the manufacturer, authorised distributor or authorised representative of the Pulsotronic brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pulsotronic
Country
Germany
Name
KJ15-M30MN40-ANI
Part number
8310000294
Category
Inductive Sensors
Type
Inductive sensor
Stock availability:
On request
If you are inspecting Pulsotronic KJ15-M30MN40-ANI 8310000294, connect FAMAGA, the world's primary distributor of machine made equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of items and personalseparate attention to each purchaser. We admire everyone, who joined with us - therefore, our regular consumers accept the most attractive purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the planet Germany, United Kingdom, Philippines, Lesotho, Indonesia, El Salvador, Italy, Bangladesh, Pakistan, Russia, Eritrea, The Gambia, Madagascar, Iceland, Singapore, Sierra Leone, Georgia, Qatar, Bosnia and Herzegovina, Fiji, Brazil, Panama, Luxembourg, Kyrgyzstan, Costa Rica, Tonga, Serbia, Finland, Vietnam, Haiti, Benin, Albania, Mauritania, Suriname, Ireland, Paraguay, South Korea, Eswatini, Estonia, Dominica, Swaziland, Uganda. A well-developed logistics connection and a partnership network cheer us to send our goods anywhere in the planet on-time without undermining product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this number is ascending every day. We are happy that consumers choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, phone us or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Product Description | inductive sensor analogue |
Name | KJ15-M30MN40-ANI |
Order number | 08310000294 |
Switching distance | from 3 mm to 15 mm |
Mounting | non shielded |
Switch type | analog |
Signal Type | analog current |
Connection | Cable |
Connection diagramm | |
Dimension (in mm) | fine-pitch thread M30 x 40 |
Technical Specification | |
Special features | Output Current 4 ... 20 mA |
Operating voltage | 11 - 35 VDC |
Max. ripple | ≤ 5 % |
No load current | ≤ 10 mA |
Switching frequency | 150 Hz |
Operating temperature | -25 ° C to 70 ° C |
Temperature drift | +/- 5 % |
Repeat accuracy | ≤ 1 % |
Linearity | ≤ 5 % |
Analog output | Pulso_has-1 |
Time delay | 300 ms |
Resolution | 1,33 mA / mm |
Reverse voltage protection | yes |
Protection category | IP67 |
EMC-level | DIN EN 60947-5-7:2004-06 |
Housing material | Brass, nickel plated |
Material active face | PCB |
Cable length | 2 m |
Utilisation category | DC 13 |
Cable material | PVC LIYY grau (grey) |
Nominal operating voltage | 24 V DC |
Cable cross | 3x0.34 mm² |
internal load resistor | <= 500 Ohm |
FIT / MTTF acc. to SIEMENS 29500 | 73,26 / 1558y |
Errors and omissions exceptet |