We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBB1,5-F79-E2-0,5M
Part number
224008
Type
Inductive sensor
Description
Inductive sensor NBB1,5-F79-E2-0,5M
Stock availability:
On request
If you are looking for Pepperl+Fuchs NBB1,5-F79-E2-0,5M 224008, connect FAMAGA, the world's influential provider of manufacturing equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of goods and particular attention to each purchaser. We praise everyone, who collaborated with us - therefore, our regular clients get the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Spain, Dominican Republic, Yemen, Angola, India, Qatar, Haiti, Fiji, Uzbekistan, Nepal, Thailand, Japan, France, Sweden, Samoa, United States, Antigua and Barbuda, East Timor, Russia, Tajikistan, Poland, Monaco, Eritrea, Laos, China, Belarus, Uganda, Bolivia, Eswatini, Mauritania, Norway, Djibouti, Albania, Indonesia, Armenia, Cyprus, Togo, Burkina Faso, Kuwait, Mexico, Afghanistan, Australia, Philippines, Lithuania. A well-built logistics chains and a partnership network guide us to conduct our items anywhere in the globe on-time without undermining product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of industrial equipment.
All items from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally open (NO) | |
Output type | PNP | |
Rated operating distance | 1.5 mm | |
Installation | flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 1.215 mm | |
Reduction factor rAl | 0.3 | |
Reduction factor rCu | 0.2 | |
Reduction factor r304 | 0.7 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 5 ... 30 V DC | |
Switching frequency | 0 ... 1200 Hz | |
Hysteresis | typ. 5 % | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 1.5 V | |
Operating current | 0 ... 100 mA | |
Off-state current | &le, 10 µ,A | |
No-load supply current | &le, 15 mA | |
Time delay before availability | &le, 20 ms | |
Functional safety related parameters | ||
MTTFd | 4830 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Mechanical specifications | ||
Connection type | cable PVC , 500 mm | |
Core cross-section | 3 x 0.09 mm2 | |
Housing material | PA | |
Sensing face | PA | |
Degree of protection | IP67 | |
Cable | ||
Cable diameter | 2.3 mm ± 0.2 mm | |
Bending radius | > 10 x cable diameter |