We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
VBG-DN-K20-DMD
Part number
190325
Type
Gateway
Description
Stock availability:
On request
Product Description |
---|
DeviceNet Gateway, double master for 2 AS-Interface networks |
General specifications | ||
---|---|---|
AS-Interface specification | V3.0 | |
PLC-Functionality | activateable | |
Duplicate address detection | from AS-Interface slaves | |
Earth fault detection | integrated | |
EMC monitoring | integrated | |
Diagnostics function | Extended function via display | |
UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source | |
Indicators/operating means | ||
Display | Illuminated graphical LC display for addressing and error messages | |
LED AS-i ACTIVE | AS-Interface operation normal, LED green | |
LED CONFIG ERR | configuration error, LED red | |
LED PRG ENABLE | autom. programming, LED green | |
LED POWER | voltage ON, LED green | |
LED PRJ MODE | projecting mode active, LED yellow | |
LED U AS-i | AS-Interface voltage, LED green | |
LED MNS | Module/net status, LED green/red | |
Switch SET | Selection and setting of a slave address | |
OK button | Mode selection traditional-graphical/confirmation | |
Button MODE | Mode selection PRJ-operation/save configuration/cursor | |
ESC button | Mode selection traditional-graphical/cancel | |
Electrical specifications | ||
Insulation voltage | &ge, 500 V | |
Rated operating voltage | from AS-Interface | |
Rated operating current | &le, 200 mA from AS-Interface circuit 1 &le, 70 mA from AS-Interface circuit 2 | |
Interface 1 | ||
Protocol | DeviceNet | |
Interface 2 | ||
Interface type | RS 232, serial Diagnostic Interface | |
Transfer rate | 19,2 kBit/s | |
Connection | ||
AS-Interface | spring terminals, removable | |
DeviceNet | 5-pin CombiCon connector according to DeviceNet specification | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 62026-2:2013 | |
Standard conformity | ||
Electromagnetic compatibility | EN 61000-6-2:2005, EN 61000-6-4:2001, EN 50295:1999 | |
Degree of protection | EN 60529:2000 | |
AS-Interface | EN 62026-2:2013 | |
Approvals and certificates | ||
EAC conformity | TR CU 020/2011 | |
UL approval | An isolated source with a secondary open circuit voltage of &le, 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device. | |
Ambient conditions | ||
Ambient temperature | 0 ... 55 °C (32 ... 131 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Mass | 520 g | |
Construction type | Low profile housing , Stainless steel |