We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
KFD2-VR2-EX1.50M
Part number
181951
Type
Repeater
Description
Voltage Repeater KFD2-VR2-Ex1.50M
Stock availability:
On request
Product Description |
---|
Transmission range 0 mV ... ± 50 mV |
General specifications | ||
---|---|---|
Signal type | Analog input | |
Supply | ||
Connection | Power Rail or terminals 14+, 15- | |
Rated voltage | 19 ... 30 V DC | |
Ripple | within the supply tolerance | |
Rated current | &le, 11 mA | |
Power dissipation/power consumption | 0.3 W max. | |
Input | ||
Connection side | field side | |
Connection | terminals 4+, 5- | |
Input resistance | min. 20 M&Omega, | |
Transmission range | -50 ... 50 mV | |
Offset voltage/current | &le, 5 µ,V / &le, 5 nA | |
Line fault detection | 100 nA | |
Output | ||
Connection side | control side | |
Connection | terminals 7+, 8- | |
Load | Accuracy figures for infinite load impedance. Additional 0.03 % of span for a load resistance of 10 k&Omega, | |
Voltage | -50 ... 50 mV | |
Fault signal | sensor breakage: > +100 mV (upscale), < -100 mV (downscale) | |
Output resistance | max. 3 &Omega, | |
Transfer characteristics | ||
Cut-off frequency | 350 Hz (-3 dB) | |
Deviation | ||
After calibration | at 20 °C (68 °F): ± 3 µ,V up to ± 10 mV/± 0.03 % of the span up to +50 mV/± 0.05 % of the span up to -50 mV | |
Influence of ambient temperature | ± 1 µ,V/K (typical ± 0.25 µ,V/K) | |
Absolute | < 0.25 K at 30 V voltage supply | |
Rise time | &le, 1 ms | |
Galvanic isolation | ||
Output/power supply | functional insulation, rated insulation voltage 50 V AC | |
Indicators/settings | ||
Display elements | LED | |
Control elements | DIP-switch | |
Configuration | via DIP switches | |
Labeling | space for labeling at the front | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | NE 21 | |
Degree of protection | IEC 60529 | |
Protection against electrical shock | UL 61010-1 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | screw terminals | |
Mass | approx. 125 g | |
Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
Data for application in connection with hazardous areas | ||
EU-Type Examination Certificate | BASEEFA 06 ATEX 0040 | |
Marking | II (1)GD, I (M1) [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I (-20 °C &le, Tamb &le, 60 °C) , [circuit(s) in zone 0/1/2] | |
Voltage | 5.5 V DC | |
Current | 2.4 mA | |
Power | 3.3 mW | |
Supply | ||
Maximum safe voltage | 250 V (Attention! The rated voltage can be lower.) | |
Certificate | BASEEFA 09 ATEX 0219X | |
Marking | II 3G Ex ec IIC T4 Gc | |
Galvanic isolation | ||
Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 | |
International approvals | ||
UL approval | ||
Control drawing | 116-0334 (cULus) | |
IECEx approval | ||
IECEx certificate | IECEx BAS 06.0011 IECEx BAS 09.0103X | |
IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Accessories | ||
Optional accessories | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-BU(-UPR-03) |