We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NCN50-FP-Z2-P1
Part number
180626
Type
Inductive sensor
Description
Inductive sensor NCN50-FP-Z2-P1
Stock availability:
On request
If you are looking for Pepperl+Fuchs NCN50-FP-Z2-P1 180626, connect FAMAGA, the world's influential supplier of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and particular attention to each consumer. We understand everyone, who joined with us - therefore, our regular purchasers obtain the most convenient purchase terms and discounts on the industrial equipment market. Today, there are more than 4500 such buyers, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, South Sudan, The Bahamas, Lesotho, Egypt, Cambodia, France, Japan, Sierra Leone, Eswatini, Saudi Arabia, Kiribati, Lebanon, Antigua and Barbuda, Malawi, Lithuania, Namibia, Togo, Greece, Sweden, Uruguay, China, Iceland, Liberia, Slovakia, Hungary, Turkmenistan, Finland, Norway, Tonga, Vietnam, Kazakhstan, Ireland, Cyprus, Ecuador, Andorra, Kyrgyzstan, Nigeria, Armenia, Mauritania, Bosnia and Herzegovina, Comoros, Brazil, Niger, Austria, Haiti, Laos, Morocco. A well-built logistics system and a partnership network guide us to send our units anywhere in the world promptly without damaging product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are glad that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as keep on top of it.
To ask a question or place an order, call us by phone or send a message to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally open/closed (NO/NC) | |
Output type | Two-wire | |
Rated operating distance | 50 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 40.5 mm | |
Actual operating distance | 45 ... 55 mm typ. | |
Reduction factor rAl | 0.4 | |
Reduction factor rCu | 0.35 | |
Reduction factor r304 | 0.8 | |
Output type | 2-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 60 V | |
Switching frequency | 0 ... 80 Hz | |
Hysteresis | 0 ... 20 typ. 5 % | |
Reverse polarity protection | reverse polarity tolerant | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 6 V | |
Operating current | 2 ... 200 mA | |
Off-state current | 0.4 ... 1 mA typ. 0.6 mA | |
Time delay before availability | &le, 300 ms | |
Switching state indicator | LED, yellow | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CSA approval | cCSAus Listed, General Purpose | |
CCC approval | Certified by China Compulsory Certification (CCC) | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Connection type | screw terminals | |
Core cross-section | up to 2.5 mm2 | |
Housing material | PBT | |
Sensing face | PBT | |
Degree of protection | IP67 |