We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
WCS-IG110
Part number
187010
Type
Interface module
Description
Stock availability:
On request
If you are inspecting Pepperl+Fuchs WCS-IG110 187010, communicate with FAMAGA, the world's principle supplier of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of products and individual attention to each orderer. We praise everyone, who cooperated with us - hence, our regular customers receive the most helpful purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4500 such clients, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Dominica, Burkina Faso, Rwanda, Malta, Greece, Cyprus, Czech Republic, Namibia, Equatorial Guinea, Latvia, Palestine, Austria, Monaco, Chad, United States, Antigua and Barbuda, Singapore, Guinea, Eritrea, Saudi Arabia, Montenegro, India, Thailand, Sierra Leone, Belize, Eswatini, Suriname, Kazakhstan, Benin, Lithuania, Samoa, Macedonia, Costa Rica, Armenia, Serbia, Georgia, Hungary, Zambia, Mali, Kyrgyzstan, Australia, Iraq. A well-elaborated logistics system and a partnership network cheer us to deliver our goods anywhere in the earth immediately without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are happy that customers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as stay in control.
To inquire or make a request, phone us or write to the online chat on our site. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Product Description |
---|
WCS INTERBUS-S interface module |
General specifications | |
---|---|
Installation | DIN rail mounting |
Functional safety related parameters | |
MTTFd | 240 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Electrical specifications | |
Operating voltage | 24 V DC ± 20 % |
Power consumption | &le, 3.6 W (without read heads) |
Interface 1 | |
Connection of | control system |
Interface type | INTERBUS-S |
Transfer rate | 500 kBit/s / 2 MBit/s , configurable |
Data output format | binary code / Gray code , switchable |
Bus termination resistor | switchable |
Interface 2 | |
Connection of | Read head |
Connectable read heads | WCS-LS221 , WCS-LS121 |
Interface type | RS-485 |
Transmission method | half duplex |
Transfer rate | 62.5 kBit/s |
RS485 termination resistor | switchable |
Refresh cycle of read head | 1 ms |
Standard conformity | |
Emitted interference | EN 55011 |
Noise immunity | DIN EN 50082-2 |
Approvals and certificates | |
CCC approval | CCC approval / marking not required for products rated &le,36 V |
Ambient conditions | |
Operating temperature | 0 ... 45 °C (32 ... 113 °F) , no moisture condensation |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Relative humidity | &le, 80 % |
Mechanical specifications | |
Connection type | Interface 1: 9-pin Sub-D connector and 9-pin Sub-D socket Interface 2: terminal connection &le, 2.5 mm2 , 5-pin |
Housing width | 90 mm |
Housing height | 127 mm |
Degree of protection | IP24 |
Material | plastic |
Installation position | any position |
Mass | approx. 200 g |