We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBB4-12GM50-E0-M
Part number
240148
Type
Inductive sensor
Description
Stock availability:
On request
If you are questing Pepperl+Fuchs NBB4-12GM50-E0-M 240148, get in touch with FAMAGA, the world's prime provider of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of outputs and particular attention to each consumer. We respect everyone, who conspired with us - hence, our regular purchasers obtain the most flexible purchase terms and discounts on the manufacturing equipment market. Today, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Panama, Ecuador, Dominica, Azerbaijan, Jamaica, Belgium, Serbia, Namibia, Mali, Togo, Iran, Ghana, Japan, Seychelles, Botswana, Uruguay, Turkmenistan, Guinea, Liberia, Eswatini, Kiribati, Tonga, Zimbabwe, Andorra, Laos, Belize, Cameroon, Egypt, Denmark, Jordan, Tunisia, United Arab Emirates, Nigeria, Lithuania, Mongolia, Croatia, Kyrgyzstan, Senegal, Argentina, India, Kenya, Zambia, Austria, Bosnia and Herzegovina, Cape Verde. A well-shaped logistics chains and a partnership network guide us to send our units anywhere in the globe with no delay without damaging product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only experts, who already have experience in the range of factory-made equipment.
All items from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this quantity is amounting every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To get some advice or book, get in touch with us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally open (NO) | |
Output type | NPN | |
Rated operating distance | 4 mm | |
Installation | flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 3.24 mm | |
Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 12 mm x 12 mm x 1 mm | |
Reduction factor rAl | 0.45 | |
Reduction factor rCu | 0.35 | |
Reduction factor r304 | 0.75 | |
Reduction factor rBrass | 0.45 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 5 ... 60 V | |
Switching frequency | 0 ... 2500 Hz | |
Hysteresis | typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Inductive overvoltage protection | yes | |
Surge suppression | yes | |
Voltage drop | &le, 2 V | |
Rated insulation voltage | 60 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA typ. 6 µ,A at 25 °C | |
No-load supply current | &le, 7 mA | |
Time delay before availability | &le, 200 ms | |
Switching state indicator | LED, yellow | |
Functional safety related parameters | ||
MTTFd | 1175 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
CSA approval | cCSAus Listed, General Purpose, Class 2 Power Source | |
CCC approval | Certified by China Compulsory Certification (CCC) | |
E1 Type approval | 10R-04 | |
Ambient conditions | ||
Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | cable PUR , 2 m | |
Core cross-section | 3 x 0.75 mm2 | |
Housing material | brass, nickel-plated | |
Sensing face | PBT | |
Degree of protection | IP68 / IP69K | |
Cable | ||
Cable diameter | 6 mm ± 0.2 mm | |
Bending radius | > 6 x cable diameter , cable in motion | |
Mass | 120 g |