We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
AFPMA5-P[5.5-8/0.01]-L[5-10/1]-B[1-10/0.1]
Description
Large Head Round/Nonmagnetic Type/Standard
Stock availability:
On request
If you are pursuing MISUMI AFPMA5-P[5.5-8/0.01]-L[5-10/1]-B[1-10/0.1], communicate with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and special attention to each buyer. We esteem everyone, who liased with us - so, our regular consumers procure the most attractive purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA operates all over the planet Germany, United Kingdom, United States, Monaco, Grenada, Moldova, Oman, Singapore, Guatemala, Congo, Vietnam, Ecuador, Liechtenstein, Honduras, Comoros, Netherlands, Brunei, Mozambique, Qatar, Dominica, Angola, Mauritania, Jamaica, Indonesia, Mexico, Kazakhstan, Fiji, Switzerland, Kiribati, East Timor, Ireland, Mauritius, Malaysia, Croatia, Morocco, Togo, Philippines, Pakistan, Serbia, Swaziland. A well-built logistics network and a partnership network guide us to ship our elements anywhere in the world with no delay without compromising product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is rising every day. We are proud that users choose FAMAGA again and again, and we strive to make more developed and technologically innovative industrial equipment so as stay in control.
To request or make a request, call us by phone or write to the online chat on our official website. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material | Surface Treatment | Tip Shape | Type | ||
Press Fit | Tapped | Threaded | |||
EN AW-2017 Equiv. | Clear Anodize | Round | AFPMA | AFPMTA | AFPMNA |
Diamond | AFPMD | AFPMTD | AFPMND |
Part Number | - | P | - | L | - | B |
AFPMA6 | - | P8.50 | - | L6 | - | B3.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | m | (W) | ? | Unit Price | |||
Type | D | d dim. Tolerance m6 | AFPMA | AFPMD | |||||||
AFPMA AFPMD Diamond Shape is applicable when D?2. | 1 | +0.008 +0.002 | 1.50~2.50 | 2, 3 | 1.0~5.0 | 0.1 | 0.5 | - | 0 | - | |
2 | 2.50~4.00 | 2~6 | 1.0~10.0 | 0.5 | 1 | 1.2 | |||||
3 | 3.50~6.00 | 3~6 | 1.0~10.0 | 2 | 1.5 | 1 | |||||
4 | +0.012 +0.004 | 4.50~7.00 | 4~8 | 1.0~10.0 | 1 | 3 | 1.8 | ||||
5 | 5.50~8.00 | 5~10 | 1.0~10.0 | 2.2 | |||||||
6 | 6.50~10.00 | 6~12 | 1.0~12.0 | 3 | |||||||
8 | +0.015 +0.006 | 9.00~13.00 | 8~16 | 1.0~15.0 | 1.5 | 4 | 3.5 | ||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | 4 | ||||||
12 | +0.018 +0.007 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | ||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 5.5 | 2 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | 5 | 7 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | ? | M (Coarse) | Recommended Tightening Torque (kgf cm) | Unit Price | |||
Type | D | D dim. Tolerance g6 | AFPMTA | AFPMTD | ||||||||
AFPMTA AFPMTD | 6 | -0.004 -0.012 | 6.50~10.00 | 6(9)~12 | 2.0~12.0 | 3 | 3 | 5 | M3 | 6.25 | ||
8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | 4 | 3.5 | 8 | M5 | 10 | |||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | 4 | ||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | |||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | 5.5 | 10 | M8 | 22.5 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 5 | 7 | 12 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | Recommended Tightening Torque (kgf cm) | Unit Price | |||
Type | D | D dim. Tolerance g6 | AFPMNA | AFPMND | |||||||
AFPMNA AFPMND | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 2 | 1.5 | 3 | 5 | ||
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 3 | 1.8 | 4 | 7 | |||
5 | 5.50~8.00 | 3~10 | 1.0~10.0 | 2.2 | 5 | 8.75 | |||||
6 | 6.50~10.00 | 3~10 | 1.0~12.0 | 3 | 6 | 17.5 | |||||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 1.0~15.0 | 4 | 3.5 | 8 | 18.75 | |||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 4 | 10 | 27.5 | |||||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 5 | 12 | 92.5 | ||||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 5 | 7 | 16 | 100 |