We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SRPCC24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1]-G[2-20/1]
Description
Support Pins/Threaded/Tapped/Pilot
Stock availability:
On request
If you are pursuing MISUMI SRPCC24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1]-G[2-20/1], reach FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are outlined in the quality of merchandises and particular attention to each orderer. We value everyone, who engaged with us - hence, our regular buyers obtain the most acceptable purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such purchasers, and we constantly form new agreements. More than 750 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Andorra, Morocco, Central African Republic, Guyana, Denmark, Papua New Guinea, Burma, Comoros, Iran, Bolivia, Dominica, Indonesia, Romania, Yemen, Croatia, Lithuania, Japan, Canada, Turkey, South Korea, Nepal, Australia, Czech Republic, Jamaica, Tanzania, Pakistan, Brunei, Benin, East Timor, South Sudan, Namibia, Guatemala, Samoa, Qatar, Afghanistan, Tajikistan, Angola, Swaziland, Switzerland, Cape Verde, Zimbabwe, Djibouti, Philippines. A well-built logistics system and a partnership network guide us to ship our elements anywhere in the world with no delay without compromising product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | ||
Threaded | Tapped | Pilot | |||
EN 1.1191 Equiv. | Black Oxide | - | SRPCB | SRPAB | SRPBB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | SRPCR | SRPAR | - |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | SRPCHB | SRPAHB | SRPBHB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | SRPCHR | SRPAHR | SRPBHR |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | SRPCC | SRPAC | SRPBC |
Part Number | - | L | - | P | - | F | - | G | ||
Type | B | |||||||||
SRPCB SRPAHB | 10 14 | - - | L50.00 L70.02 | - - | P5.98 P6.00 | - - | F3.0 F5.0 | - | G5 |
M (Coarse) | Tightening Torque N cm |
M3 | 147 |
M4 | 333 |
M5 | 676 |
M6 | ?1156 |
M8 | ?2803 |
M10 | ?5557 |
M12 | ?9702 |
M16 | 24108 |
M20 | 46942 |
Part Number | L 0.01mm Increment | P 0.01mm Increment | F 0.1mm Increment | G 1mm Increment | m | (C) | d | M (Coarse) | M1 (Coarse) | ?1 | d1 | |||
Type | B | |||||||||||||
Threaded only | ||||||||||||||
Threaded SRPCB SRPCR SRPCHB SRPCHR SRPCC | Tapped SRPAB SRPAR SRPAHB SRPAHR SRPAC | Pilot SRPBB SRPBHB SRPBHR SRPBC | 6 | 10.00~50.00 | 3.00~4.00 | 2.0~12.0 | 0 or 2?G?dx2 | 1 | 6.9 | 4 | M4 | M3 | - | - |
7 | 3.00~6.00 | 2.0~15.0 | 8.1 | |||||||||||
8 | 15.00~50.00 | 9.2 | 5 | M5 | M4 | |||||||||
10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 2 | 11.5 | M5 | 6 | 8 | ||||||
12 | 4.00~10.00 | 13.9 | 6 | M6 | 10 | |||||||||
13 | 5.00~10.00 | 2.0~25.0 | 3 | 15 | M6 | 8 | ||||||||
14 | 16.2 | |||||||||||||
17 | 8.00~15.00 | 2.0~30.0 | 19.6 | 8 | M8 | 9 | 12 | |||||||
19 | 21.9 | M8 | ||||||||||||
24 | 10.00~15.00 | 4 | 27.7 | 10 | M10 | 10 | 16 |