We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SHFJ4-P[4.5-7/0.1]-Q[2-6/0.01]-K[4-8/1]-L[10-60/0.01]-B[2-10/0.1]
Description
Support Pins/Press Fit/Tapped/Threaded
Stock availability:
On request
If you are inspecting MISUMI SHFJ4-P[4.5-7/0.1]-Q[2-6/0.01]-K[4-8/1]-L[10-60/0.01]-B[2-10/0.1], catch up with FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of outputs and particular attention to each customer. We understand everyone, who worked with us - hence, our regular clients receive the most helpful purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such clients, and we constantly make new agreements. More than 600 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, South Africa, Bahrain, Laos, Guatemala, Malawi, United Arab Emirates, Bhutan, Tunisia, Equatorial Guinea, Slovenia, Namibia, Samoa, Sudan, Bangladesh, Peru, India, Cape Verde, Djibouti, Tanzania, Argentina, Senegal, Bulgaria, Tajikistan, Armenia, Saudi Arabia, Turkey, Ghana, Iran, Gambia, Macedonia, Malta, Tonga, Latvia, Denmark, Comoros, Belize, Estonia, Brazil, Slovakia, Zambia, The Gambia, Moldova, Paraguay, Chile, Malaysia, Iceland, Eswatini, Israel, Mauritania. A well-built logistics bond and a partnership network assist us to dispatch our units anywhere in the planet with no delay without disreputing product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is ascending every day. We are happy that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as to stay on the top.
To get some advice or place an order, get in touch with us or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |||||
Straight | Shouldered | |||||||
Press Fit | Tapped | Threaded | Press Fit | Tapped | Threaded | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | SHFJ | SHFU | SHFN | - | SHXU | SHXN |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GSHFJ | GSHFU | GSHFN | GSHXJ | - | - |
EN 1.4301 Equiv. | - | - | SSHFJ | SSHFU | SSHFN | - | - | SSHXN |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CSHFJ | CSHFU | CSHFN | CSHXJ | CSHXU | CSHXN |
Part Number | - | P | - | Q | - | K | - | L | - | B |
SHFJ5 | - | P6.0 | - | Q4.50 | - | K5 | - | L30.55 | - | B3.2 |
D | H | M (Coarse) | M1 (Coarse) | m |
3 | 6 | M3 | - | 1 |
4 | M4 | |||
5 | 8 | M5 | ||
6 | M6 | M3 | 2 | |
8 | 11 | M8 | M4 | |
10 | 13 | M10 | M5 | 3 |
12 | 15 | M12 |
M (Coarse) | Tightening Torque |
N cm | |
M3 | ?147 |
M4 | ?333 |
M5 | ?676 |
M6 | 1156 |
M8 | 2803 |
M10 | 5557 |
M12 | 9702 |
Part Number | P | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | |||||||
Type | D | 0.1mm Increment | SHFJ | GSHFJ | SSHFJ | CSHFJ | GSHXJ | CSHXJ | ||||||
Straight | Shouldered | |||||||||||||
Straight SHFJ GSHFJ SSHFJ CSHFJ | Shouldered GSHXJ CSHXJ | 3 | 3.5~6.0 | 3.0~5.0 | 2.00~5.00 | 3~6 | 10.00~60.00 | 2.0~5.0 | ||||||
4 | 4.5~7.0 | 3.0~5.0 | 2.00~6.00 | 4~8 | 10.00~60.00 | 2.0~10.0 | ||||||||
5 | 5.5~8.0 | 3.0~7.0 | 2.00~7.00 | 5~10 | 10.00~60.00 | 2.0~10.0 | ||||||||
6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 6~12 | 10.00~80.00 | 2.0~12.0 | ||||||||
8 | 9.0~13.0 | 5.0~8.0 | 4.00~12.00 | 8~16 | 10.00~80.00 | 2.0~15.0 | ||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 10~20 | 10.00~100.00 | 2.0~20.0 | ||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 12~24 | 10.00~100.00 | 2.0~20.0 |
Part Number | P 0.1mm Increment | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | |||||||
Type | D | SHFU | GSHFU | SSHFU | CSHFU | SHXU | CSHXU | |||||||
Straight | Shouldered | |||||||||||||
Straight SHFU GSHFU SSHFU CSHFU | Shouldered SHXU CSHXU | 6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 6~12 | 10.00~80.00 | 2.0~12.0 | ||||||
8 | 9.0~13.0 | 5.0~9.0 | 4.00~12.00 | 8~16 | 10.00~80.00 | 2.0~15.0 | ||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 10~20 | 10.00~100.00 | 2.0~20.0 | ||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 12~24 | 10.00~100.00 | 2.0~20.0 |
Part Number | P 0.1mm Increment | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | ||||||||
Type | D | SHFN | GSHFN | SSHFN | CSHFN | SHXN | SSHXN | CSHXN | |||||||
Straight | Shouldered | ||||||||||||||
Straight SHFN GSHFN SSHFN CSHFN | Shouldered SHXN SSHXN CSHXN | 3 | 3.5~6.0 | 3.0~5.0 | 2.00~5.00 | 0~6 | 10.00~60.00 | 2.0~5.0 | |||||||
4 | 4.5~7.0 | 3.0~5.0 | 2.00~6.00 | 0~8 | 10.00~60.00 | 2.0~10.0 | |||||||||
5 | 5.5~8.0 | 3.0~7.0 | 2.00~7.00 | 0~10 | 10.00~60.00 | 2.0~10.0 | |||||||||
6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 0~12 | 10.00~80.00 | 2.0~12.0 | |||||||||
8 | 9.0~13.0 | 5.0~9.0 | 4.00~12.00 | 0~16 | 10.00~80.00 | 2.0~15.0 | |||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 0~20 | 10.00~100.00 | 2.0~20.0 | |||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 0~24 | 10.00~100.00 | 2.0~20.0 |