![MISUMI SFPDTC6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]](https://static-famaga.fra1.digitaloceanspaces.com/marketing/photo/nameGenBmmwn0.jpeg)
We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDTC6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for MISUMI SFPDTC6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1], call FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are illustrated in the quality of products and special attention to each orderer. We respect everyone, who joined with us - hence, our regular clients receive the most convenient purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such buyers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Sweden, Ukraine, Togo, Macedonia, Serbia, Antigua and Barbuda, Cameroon, Albania, Liechtenstein, Uganda, Bosnia and Herzegovina, Denmark, Guinea, Eritrea, Armenia, The Bahamas, Czech Republic, Mauritius, India, Liberia, New Zealand, Sierra Leone, Slovakia, Gambia, Argentina, Tonga, Montenegro, Tanzania, Paraguay, Azerbaijan, Cape Verde, Norway, Costa Rica, Greece, Comoros, Rwanda, Kenya, Brazil, Finland, Uruguay, Central African Republic. A advanced logistics system and a partnership network assist us to conduct our units anywhere in the planet with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All outcomes from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are glad that purchasers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, contact us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Material No. | Material | Surface Treatment | Hardness | Type | ||
| P Selectable | P Configurable | P, L, B Configurable | ||||
| EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
| EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
| EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
| EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
| EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
| Part Number | - | P | - | L | - | B |
| JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
| P | h6 |
| 5.50~6.00 | 0 -0.008 |
| 6.01~10.00 | 0 -0.009 |
| 10.01~18.00 | 0 -0.011 |
| 18.01~30.00 | 0 -0.013 |
| Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
| Type | D | D dim. Tolerance g6 | |||||||
| JPDTA GJPDTA SJPDTA CJPDTA | ?6 | -0.004 -0.012 | ?8, 10 | 10 | ?5 | M3 | ?147 | ?5 | 1 |
| ?8 | -0.005 -0.014 | 12 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
| 10 | 12, 14 | 16 | 10 | 2 | |||||
| 12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
| 13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
| 16 | 25 | 24 | 25 | ||||||
| 20 | -0.007 -0.020 | 30 | 32 | 30 |
| Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
| Type | D | D dim. Tolerance g6 | |||||||
| JPDTC GJPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?8 | ?4 | M2 | - | ?3 | 1 |
| ?6 | ?6.50~10.00 | 10 | ?5 | M3 | ?147 | ?5 | |||
| ?6T | M2.6 | - | ?4 | ||||||
| ?8 | -0.005 -0.014 | ?9.00~13.00 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
| ?8T | M4 | ?333 | ?6 | ||||||
| 10 | 11.00~15.00 | 16 | 10 | M5 | ?676 | ?8 | 2 | ||
| 12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
| 13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
| 16 | 17.00~25.00 | 24 | 25 | ||||||
| 20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
| Type | D | D dim. Tolerance g6 | |||||||
| FPDTC GFPDTC BFPDTC SFPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5~10 | 2.0~10.0 | M2 | - | ?3 | 1 |
| ?6 | ?6.50~10.00 | ?6~12 | 2.0~12.0 | M3 | ?147 | ?5 | |||
| ?6T | M2.6 | - | ?4 | ||||||
| ?8 | -0.005 -0.014 | ?9.00~13.00 | ?8~16 | 2.0~15.0 | M5 | ?676 | ?8 | 1.5 | |
| ?8T | ?6~16 | M4 | ?333 | ?6 | |||||
| 10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | ?676 | ?8 | 2 | ||
| 10T | ?6~16 | M4 | ?333 | ?6 | |||||
| 12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | ?676 | ?8 | ||
| 12T | ?8~18 | M4 | ?333 | ?6 | |||||
| 13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
| 13T | ?8~20 | M6 | 1156 | ?9 | |||||
| 16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
| 16T | 10~24 | M6 | 1156 | ?9 | |||||
| 20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
| 20T | 12~30 | M6 | 1156 | ?9 |
