We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDTC20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
If you are pursuing MISUMI SFPDTC20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1], catch up with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of goods and special attention to each buyer. We cherish everyone, who liased with us - hence, our regular consumers procure the most helpful purchase forms and discounts on the factory-made equipment market. Now, there are more than 4500 such purchasers, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Dominica, Macedonia, Djibouti, Kiribati, Peru, Tunisia, Malta, Finland, Azerbaijan, Bangladesh, Slovenia, Eswatini, Bhutan, Netherlands, Nigeria, Guyana, Libya, Costa Rica, Armenia, Gambia, Uruguay, Bosnia and Herzegovina, Chile, Uzbekistan, Moldova, Andorra, Bulgaria, Norway, Austria, Ecuador, Estonia, Kenya, Haiti, Mali, Mexico, Kyrgyzstan, Ukraine, Niger, Samoa, Central African Republic, Uganda. A well-built logistics link and a partnership network help us to dispatch our goods anywhere in the earth promptly without undermining product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All items from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this bulk is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To get some advice or book, contact us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDTA GJPDTA SJPDTA CJPDTA | ?6 | -0.004 -0.012 | ?8, 10 | 10 | ?5 | M3 | ?147 | ?5 | 1 |
?8 | -0.005 -0.014 | 12 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 25 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDTC GJPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?8 | ?4 | M2 | - | ?3 | 1 |
?6 | ?6.50~10.00 | 10 | ?5 | M3 | ?147 | ?5 | |||
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
?8T | M4 | ?333 | ?6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | ?676 | ?8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
FPDTC GFPDTC BFPDTC SFPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5~10 | 2.0~10.0 | M2 | - | ?3 | 1 |
?6 | ?6.50~10.00 | ?6~12 | 2.0~12.0 | M3 | ?147 | ?5 | |||
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?8~16 | 2.0~15.0 | M5 | ?676 | ?8 | 1.5 | |
?8T | ?6~16 | M4 | ?333 | ?6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | ?676 | ?8 | 2 | ||
10T | ?6~16 | M4 | ?333 | ?6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | ?676 | ?8 | ||
12T | ?8~18 | M4 | ?333 | ?6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
13T | ?8~20 | M6 | 1156 | ?9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
16T | 10~24 | M6 | 1156 | ?9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | ?9 |