We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDTC16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1]
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
If you are looking for MISUMI SFPDTC16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1], communicate with FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of items and particular attention to each purchaser. We appreciate everyone, who joined with us - so, our regular clients accept the most flexible purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Bangladesh, China, India, Cape Verde, Zambia, Philippines, Malaysia, Greece, Russia, Mauritius, Lebanon, Colombia, Vietnam, Romania, Liberia, Serbia, Liechtenstein, Mexico, Iraq, Luxembourg, Guyana, Dominica, Japan, Burkina Faso, Nicaragua, Guatemala, Panama, Yemen, Bolivia, Latvia, El Salvador, Iceland, Togo, Sierra Leone, Benin, Kazakhstan, Seychelles, Djibouti, Mauritania, Mali, Syria, East Timor. A advanced logistics series and a partnership network cheer us to send our products anywhere in the globe immediately without compromising product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of industrial equipment.
All spare parts from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been provided, and this amount is rising every day. We are happy that consumers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as stay in control.
To ask a question or make a request, contact us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDTA GJPDTA SJPDTA CJPDTA | ?6 | -0.004 -0.012 | ?8, 10 | 10 | ?5 | M3 | ?147 | ?5 | 1 |
?8 | -0.005 -0.014 | 12 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 25 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDTC GJPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?8 | ?4 | M2 | - | ?3 | 1 |
?6 | ?6.50~10.00 | 10 | ?5 | M3 | ?147 | ?5 | |||
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
?8T | M4 | ?333 | ?6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | ?676 | ?8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
FPDTC GFPDTC BFPDTC SFPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5~10 | 2.0~10.0 | M2 | - | ?3 | 1 |
?6 | ?6.50~10.00 | ?6~12 | 2.0~12.0 | M3 | ?147 | ?5 | |||
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?8~16 | 2.0~15.0 | M5 | ?676 | ?8 | 1.5 | |
?8T | ?6~16 | M4 | ?333 | ?6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | ?676 | ?8 | 2 | ||
10T | ?6~16 | M4 | ?333 | ?6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | ?676 | ?8 | ||
12T | ?8~18 | M4 | ?333 | ?6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
13T | ?8~20 | M6 | 1156 | ?9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
16T | 10~24 | M6 | 1156 | ?9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | ?9 |