We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDTC13T-P[14-18/0.01]-L[8-20/1]-B[5-30/0.1]
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
If you are inspecting MISUMI SFPDTC13T-P[14-18/0.01]-L[8-20/1]-B[5-30/0.1], catch up with FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of outcomes and particular attention to each client. We cherish everyone, who conspired with us - hence, our regular clients obtain the most helpful purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such customers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, East Timor, India, Cape Verde, Armenia, Finland, Malta, Tonga, Pakistan, Belize, Equatorial Guinea, Honduras, Lebanon, Norway, Malawi, Monaco, Mongolia, Fiji, Austria, Zimbabwe, Iceland, Turkmenistan, Uganda, Liberia, Israel, Liechtenstein, Niger, Eswatini, Turkey, Ukraine, Ghana, Burundi, Serbia, Macedonia, Tajikistan, Argentina, Latvia, Libya, Kiribati, Chile, Botswana, Bangladesh, Sudan. A advanced logistics link and a partnership network let us to deliver our products anywhere in the globe immediately without disreputing product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are glad that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To consult or place an order, contact us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDTA GJPDTA SJPDTA CJPDTA | ?6 | -0.004 -0.012 | ?8, 10 | 10 | ?5 | M3 | ?147 | ?5 | 1 |
?8 | -0.005 -0.014 | 12 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 25 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDTC GJPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?8 | ?4 | M2 | - | ?3 | 1 |
?6 | ?6.50~10.00 | 10 | ?5 | M3 | ?147 | ?5 | |||
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
?8T | M4 | ?333 | ?6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | ?676 | ?8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
FPDTC GFPDTC BFPDTC SFPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5~10 | 2.0~10.0 | M2 | - | ?3 | 1 |
?6 | ?6.50~10.00 | ?6~12 | 2.0~12.0 | M3 | ?147 | ?5 | |||
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?8~16 | 2.0~15.0 | M5 | ?676 | ?8 | 1.5 | |
?8T | ?6~16 | M4 | ?333 | ?6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | ?676 | ?8 | 2 | ||
10T | ?6~16 | M4 | ?333 | ?6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | ?676 | ?8 | ||
12T | ?8~18 | M4 | ?333 | ?6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
13T | ?8~20 | M6 | 1156 | ?9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
16T | 10~24 | M6 | 1156 | ?9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | ?9 |