We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDTC13-P[14-18/0.01]-L[13-26/1]-B[5-30/0.1]
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
If you are pursuing MISUMI SFPDTC13-P[14-18/0.01]-L[13-26/1]-B[5-30/0.1], reach FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of outputs and special attention to each customer. We esteem everyone, who worked with us - so, our regular consumers receive the most beneficial purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Sudan, Cape Verde, Armenia, Estonia, Lithuania, Croatia, Qatar, Mali, El Salvador, Costa Rica, Burma, Honduras, Switzerland, Eritrea, Gambia, Peru, Azerbaijan, Afghanistan, Sierra Leone, Serbia, Nicaragua, Syria, Monaco, South Korea, Fiji, Egypt, United Arab Emirates, Swaziland, Togo, Madagascar, Angola, Mongolia, Djibouti, Bosnia and Herzegovina, United States, Ghana, Comoros, China, Belarus, Namibia, East Timor, Mauritius. A advanced logistics bond and a partnership network help us to deliver our goods anywhere in the earth immediately without compromising product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To request or book, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDTA GJPDTA SJPDTA CJPDTA | ?6 | -0.004 -0.012 | ?8, 10 | 10 | ?5 | M3 | ?147 | ?5 | 1 |
?8 | -0.005 -0.014 | 12 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 25 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDTC GJPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?8 | ?4 | M2 | - | ?3 | 1 |
?6 | ?6.50~10.00 | 10 | ?5 | M3 | ?147 | ?5 | |||
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
?8T | M4 | ?333 | ?6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | ?676 | ?8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
FPDTC GFPDTC BFPDTC SFPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5~10 | 2.0~10.0 | M2 | - | ?3 | 1 |
?6 | ?6.50~10.00 | ?6~12 | 2.0~12.0 | M3 | ?147 | ?5 | |||
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?8~16 | 2.0~15.0 | M5 | ?676 | ?8 | 1.5 | |
?8T | ?6~16 | M4 | ?333 | ?6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | ?676 | ?8 | 2 | ||
10T | ?6~16 | M4 | ?333 | ?6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | ?676 | ?8 | ||
12T | ?8~18 | M4 | ?333 | ?6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
13T | ?8~20 | M6 | 1156 | ?9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
16T | 10~24 | M6 | 1156 | ?9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | ?9 |