We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDTC10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1]
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
If you are looking for MISUMI SFPDTC10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1], catch up with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are described in the quality of merchandises and personalseparate attention to each orderer. We esteem everyone, who joined with us - hence, our regular buyers get the most helpful purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such consumers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Costa Rica, Nigeria, Luxembourg, Iceland, Pakistan, Tonga, Denmark, Benin, Jordan, Iraq, Oman, Guinea, Ukraine, Chad, Guyana, Zambia, Russia, Ghana, Grenada, Laos, Azerbaijan, Sudan, Uzbekistan, Kyrgyzstan, Ecuador, Chile, Norway, Iran, Kiribati, Bulgaria, Antigua and Barbuda, Albania, India, Belize, Brazil, Indonesia, Austria, Armenia, Israel, United States, Equatorial Guinea, Algeria. A well-elaborated logistics connection and a partnership network assist us to send our products anywhere in the earth on-time without damaging product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been provided, and this quantity is growing every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as keep on top of it.
To get some advice or place an order, contact us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDTA GJPDTA SJPDTA CJPDTA | ?6 | -0.004 -0.012 | ?8, 10 | 10 | ?5 | M3 | ?147 | ?5 | 1 |
?8 | -0.005 -0.014 | 12 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 25 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDTC GJPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?8 | ?4 | M2 | - | ?3 | 1 |
?6 | ?6.50~10.00 | 10 | ?5 | M3 | ?147 | ?5 | |||
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
?8T | M4 | ?333 | ?6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | ?676 | ?8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
FPDTC GFPDTC BFPDTC SFPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5~10 | 2.0~10.0 | M2 | - | ?3 | 1 |
?6 | ?6.50~10.00 | ?6~12 | 2.0~12.0 | M3 | ?147 | ?5 | |||
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?8~16 | 2.0~15.0 | M5 | ?676 | ?8 | 1.5 | |
?8T | ?6~16 | M4 | ?333 | ?6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | ?676 | ?8 | 2 | ||
10T | ?6~16 | M4 | ?333 | ?6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | ?676 | ?8 | ||
12T | ?8~18 | M4 | ?333 | ?6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
13T | ?8~20 | M6 | 1156 | ?9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
16T | 10~24 | M6 | 1156 | ?9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | ?9 |