We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDSTC8-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1]
Description
Small Flat Head/Tapped/P Configurable
Stock availability:
On request
If you are pursuing MISUMI SFPDSTC8-P[6-8/0.01]-L[11-16/1]-B[2-15/0.1], call FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are years of experience, which are illustrated in the quality of outputs and private attention to each purchaser. We respect everyone, who cooperated with us - hence, our regular customers accept the most convenient purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such consumers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Haiti, Iceland, Serbia, Mongolia, Botswana, Andorra, Eswatini, United States, Antigua and Barbuda, Sierra Leone, Singapore, Bhutan, Macedonia, Liberia, Nicaragua, Lithuania, El Salvador, Montenegro, Malawi, Zambia, Ecuador, Equatorial Guinea, Turkmenistan, Czech Republic, Belize, Hungary, Kenya, Australia, India, Senegal, Tunisia, Finland, Armenia, Burundi, Niger, Brunei, Kazakhstan, Nigeria, Rwanda, Ireland, Algeria, Iraq. A well-developed logistics network and a partnership network assist us to dispatch our goods anywhere in the world quickly without discrediting product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the sphere of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this quantity is rising every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To consult or book, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDSTB | JPDSTC | FPDSTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFPDSTC | |
EN 1.4301 Equiv.* | - | - | SJPDSTB | - | SFPDSTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPDSTC | CFPDSTC |
Part Number | - | P | - | L | - | B |
JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | ? | C | ||||||
Type | D | D dim. Tolerance g6 | |||||||||||
JPDSTB SJPDSTB | ?6 | -0.004 -0.012 | 4 | 10 | ?3 | M3 | ?147 | ?5 | 0.5 | ||||
?8 | -0.005 -0.014 | 6 | 12 | ?4 | M4 | ?333 | ?6 | 1 | |||||
10 | 8 | 16 | ?5 | M5 | ?676 | ?8 | |||||||
12 | -0.006 -0.017 | 10 | 20 | ?6 | 1.5 | ||||||||
16 | 10 | 14 | 24 | 10 | M8 | 2803 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDSTC CJPDSTC | ?6 | -0.004 -0.012 | 4.00~6.00 | 10 | ?3 | M3 | ?147 | ?5 | 0.5 |
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 12 | ?4 | M4 | ?333 | ?6 | 1 | |
10 | ?7.00~10.00 | 16 | ?5 | M5 | ?676 | ?8 | |||
12 | -0.006 -0.017 | ?7.00~12.00 | 20 | ?6 | 1.5 | ||||
13 | ?8.00~13.00 | 22 | 10 | M8 | 2803 | 12 | 2 | ||
16 | 10.00~16.00 | 24 | 10 | 3 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
FPDSTC GFPDSTC SFPDSTC CFPDSTC | ?6 | -0.004 -0.012 | 4.00~6.00 | ?8~12 | 2.0~12.0 | M3 | ?147 | ?5 | 0.5 |
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 11~16 | 2.0~15.0 | M4 | ?333 | ?6 | 1 | |
10 | ?7.00~10.00 | 11~20 | 3.0~20.0 | M5 | ?676 | ?8 | |||
10T | ?8~16 | M4 | ?333 | ?6 | |||||
12 | -0.006 -0.017 | ?7.00~12.00 | 12~24 | 3.0~20.0 | M5 | ?676 | ?8 | 1.5 | |
12T | ?8~18 | M4 | ?333 | ?6 | |||||
13 | ?8.00~13.00 | 13~26 | 5.0~20.0 | M8 | 2803 | 10 | 2 | ||
13T | 10~20 | M6 | 1156 | ?9 | |||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 3 | ||
16T | 10~24 | M6 | 1156 | ?9 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | ?9 |