We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDSTC13T-P[8-13/0.01]-L[10-20/1]-B[5-20/0.1]
Description
Small Flat Head/Tapped/P Configurable
Stock availability:
On request
If you are seeking MISUMI SFPDSTC13T-P[8-13/0.01]-L[10-20/1]-B[5-20/0.1], reach FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and private attention to each consumer. We esteem everyone, who engaged with us - so, our regular purchasers accept the most beneficial purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such clients, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Gabon, Venezuela, Finland, Lithuania, Samoa, Brazil, Vietnam, Bolivia, Slovakia, Croatia, Papua New Guinea, Palestine, Chad, Netherlands, Estonia, Nicaragua, Belize, Benin, Oman, Swaziland, Monaco, Botswana, Eritrea, Tajikistan, Russia, Afghanistan, Georgia, Mozambique, China, Dominica, Serbia, Nepal, Malaysia, Namibia, Peru, Jamaica, Burkina Faso, Iran, Brunei, Albania, Comoros, Chile, The Gambia, Tunisia. A well-shaped logistics system and a partnership network allow us to conduct our goods anywhere in the world quickly without discrediting product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as keep on top of it.
To request or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDSTB | JPDSTC | FPDSTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFPDSTC | |
EN 1.4301 Equiv.* | - | - | SJPDSTB | - | SFPDSTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPDSTC | CFPDSTC |
Part Number | - | P | - | L | - | B |
JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | ? | C | ||||||
Type | D | D dim. Tolerance g6 | |||||||||||
JPDSTB SJPDSTB | ?6 | -0.004 -0.012 | 4 | 10 | ?3 | M3 | ?147 | ?5 | 0.5 | ||||
?8 | -0.005 -0.014 | 6 | 12 | ?4 | M4 | ?333 | ?6 | 1 | |||||
10 | 8 | 16 | ?5 | M5 | ?676 | ?8 | |||||||
12 | -0.006 -0.017 | 10 | 20 | ?6 | 1.5 | ||||||||
16 | 10 | 14 | 24 | 10 | M8 | 2803 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDSTC CJPDSTC | ?6 | -0.004 -0.012 | 4.00~6.00 | 10 | ?3 | M3 | ?147 | ?5 | 0.5 |
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 12 | ?4 | M4 | ?333 | ?6 | 1 | |
10 | ?7.00~10.00 | 16 | ?5 | M5 | ?676 | ?8 | |||
12 | -0.006 -0.017 | ?7.00~12.00 | 20 | ?6 | 1.5 | ||||
13 | ?8.00~13.00 | 22 | 10 | M8 | 2803 | 12 | 2 | ||
16 | 10.00~16.00 | 24 | 10 | 3 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
FPDSTC GFPDSTC SFPDSTC CFPDSTC | ?6 | -0.004 -0.012 | 4.00~6.00 | ?8~12 | 2.0~12.0 | M3 | ?147 | ?5 | 0.5 |
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 11~16 | 2.0~15.0 | M4 | ?333 | ?6 | 1 | |
10 | ?7.00~10.00 | 11~20 | 3.0~20.0 | M5 | ?676 | ?8 | |||
10T | ?8~16 | M4 | ?333 | ?6 | |||||
12 | -0.006 -0.017 | ?7.00~12.00 | 12~24 | 3.0~20.0 | M5 | ?676 | ?8 | 1.5 | |
12T | ?8~18 | M4 | ?333 | ?6 | |||||
13 | ?8.00~13.00 | 13~26 | 5.0~20.0 | M8 | 2803 | 10 | 2 | ||
13T | 10~20 | M6 | 1156 | ?9 | |||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 3 | ||
16T | 10~24 | M6 | 1156 | ?9 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | ?9 |