We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDSTC12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1]
Description
Small Flat Head/Tapped/P Configurable
Stock availability:
On request
If you are pursuing MISUMI SFPDSTC12-P[7-12/0.01]-L[12-24/1]-B[3-20/0.1], catch up with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each purchaser. We esteem everyone, who cooperated with us - hence, our regular consumers bring in the most helpful purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Côte d\'Ivoire, Spain, Greece, Pakistan, Mali, Egypt, Kenya, Macedonia, Belarus, Tonga, Belgium, Colombia, Monaco, Liberia, Iceland, Azerbaijan, Angola, Moldova, Grenada, Iran, Uzbekistan, Argentina, Chad, Netherlands, Burundi, Ghana, Cameroon, Libya, Armenia, Bangladesh, Laos, New Zealand, Andorra, United States, Zambia, Malta, Rwanda, Morocco, Turkey, Lithuania, Austria, Burkina Faso, Tunisia, Philippines. A well-shaped logistics system and a partnership network help us to deliver our goods anywhere in the planet immediately without compromising product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All products from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this quantity is rising every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To get some advice or book, contact us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDSTB | JPDSTC | FPDSTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFPDSTC | |
EN 1.4301 Equiv.* | - | - | SJPDSTB | - | SFPDSTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPDSTC | CFPDSTC |
Part Number | - | P | - | L | - | B |
JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | ? | C | ||||||
Type | D | D dim. Tolerance g6 | |||||||||||
JPDSTB SJPDSTB | ?6 | -0.004 -0.012 | 4 | 10 | ?3 | M3 | ?147 | ?5 | 0.5 | ||||
?8 | -0.005 -0.014 | 6 | 12 | ?4 | M4 | ?333 | ?6 | 1 | |||||
10 | 8 | 16 | ?5 | M5 | ?676 | ?8 | |||||||
12 | -0.006 -0.017 | 10 | 20 | ?6 | 1.5 | ||||||||
16 | 10 | 14 | 24 | 10 | M8 | 2803 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDSTC CJPDSTC | ?6 | -0.004 -0.012 | 4.00~6.00 | 10 | ?3 | M3 | ?147 | ?5 | 0.5 |
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 12 | ?4 | M4 | ?333 | ?6 | 1 | |
10 | ?7.00~10.00 | 16 | ?5 | M5 | ?676 | ?8 | |||
12 | -0.006 -0.017 | ?7.00~12.00 | 20 | ?6 | 1.5 | ||||
13 | ?8.00~13.00 | 22 | 10 | M8 | 2803 | 12 | 2 | ||
16 | 10.00~16.00 | 24 | 10 | 3 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
FPDSTC GFPDSTC SFPDSTC CFPDSTC | ?6 | -0.004 -0.012 | 4.00~6.00 | ?8~12 | 2.0~12.0 | M3 | ?147 | ?5 | 0.5 |
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 11~16 | 2.0~15.0 | M4 | ?333 | ?6 | 1 | |
10 | ?7.00~10.00 | 11~20 | 3.0~20.0 | M5 | ?676 | ?8 | |||
10T | ?8~16 | M4 | ?333 | ?6 | |||||
12 | -0.006 -0.017 | ?7.00~12.00 | 12~24 | 3.0~20.0 | M5 | ?676 | ?8 | 1.5 | |
12T | ?8~18 | M4 | ?333 | ?6 | |||||
13 | ?8.00~13.00 | 13~26 | 5.0~20.0 | M8 | 2803 | 10 | 2 | ||
13T | 10~20 | M6 | 1156 | ?9 | |||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 3 | ||
16T | 10~24 | M6 | 1156 | ?9 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | ?9 |