We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDSTC10T-P[7-10/0.01]-L[8-16/1]-B[3-20/0.1]
Description
Small Flat Head/Tapped/P Configurable
Stock availability:
On request
If you are questing MISUMI SFPDSTC10T-P[7-10/0.01]-L[8-16/1]-B[3-20/0.1], reach FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and individual attention to each buyer. We admire everyone, who liased with us - so, our regular customers procure the most beneficial purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Bahrain, San Marino, Pakistan, Mali, Botswana, Slovakia, Bolivia, Djibouti, Hungary, Qatar, Colombia, Lebanon, Gambia, Monaco, Serbia, South Sudan, Jordan, Ireland, Romania, Nepal, Guyana, United States, Japan, Chad, Angola, Madagascar, Philippines, Comoros, Estonia, East Timor, Albania, Suriname, Cyprus, Moldova, Finland, Croatia, Poland, New Zealand, Swaziland, Samoa, Afghanistan, Israel, Jamaica, Malta. A well-built logistics link and a partnership network help us to deliver our goods anywhere in the planet promptly without disreputing product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as stay in control.
To request or place an order, get in touch with us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDSTB | JPDSTC | FPDSTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFPDSTC | |
EN 1.4301 Equiv.* | - | - | SJPDSTB | - | SFPDSTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPDSTC | CFPDSTC |
Part Number | - | P | - | L | - | B |
JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | ? | C | ||||||
Type | D | D dim. Tolerance g6 | |||||||||||
JPDSTB SJPDSTB | ?6 | -0.004 -0.012 | 4 | 10 | ?3 | M3 | ?147 | ?5 | 0.5 | ||||
?8 | -0.005 -0.014 | 6 | 12 | ?4 | M4 | ?333 | ?6 | 1 | |||||
10 | 8 | 16 | ?5 | M5 | ?676 | ?8 | |||||||
12 | -0.006 -0.017 | 10 | 20 | ?6 | 1.5 | ||||||||
16 | 10 | 14 | 24 | 10 | M8 | 2803 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDSTC CJPDSTC | ?6 | -0.004 -0.012 | 4.00~6.00 | 10 | ?3 | M3 | ?147 | ?5 | 0.5 |
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 12 | ?4 | M4 | ?333 | ?6 | 1 | |
10 | ?7.00~10.00 | 16 | ?5 | M5 | ?676 | ?8 | |||
12 | -0.006 -0.017 | ?7.00~12.00 | 20 | ?6 | 1.5 | ||||
13 | ?8.00~13.00 | 22 | 10 | M8 | 2803 | 12 | 2 | ||
16 | 10.00~16.00 | 24 | 10 | 3 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
FPDSTC GFPDSTC SFPDSTC CFPDSTC | ?6 | -0.004 -0.012 | 4.00~6.00 | ?8~12 | 2.0~12.0 | M3 | ?147 | ?5 | 0.5 |
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 11~16 | 2.0~15.0 | M4 | ?333 | ?6 | 1 | |
10 | ?7.00~10.00 | 11~20 | 3.0~20.0 | M5 | ?676 | ?8 | |||
10T | ?8~16 | M4 | ?333 | ?6 | |||||
12 | -0.006 -0.017 | ?7.00~12.00 | 12~24 | 3.0~20.0 | M5 | ?676 | ?8 | 1.5 | |
12T | ?8~18 | M4 | ?333 | ?6 | |||||
13 | ?8.00~13.00 | 13~26 | 5.0~20.0 | M8 | 2803 | 10 | 2 | ||
13T | 10~20 | M6 | 1156 | ?9 | |||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 3 | ||
16T | 10~24 | M6 | 1156 | ?9 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | ?9 |