We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPDC2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1]
Description
Large Flat Head/Standard/P Standard
Stock availability:
On request
If you are seeking MISUMI SFPDC2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1], call FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are illustrated in the quality of products and private attention to each purchaser. We appreciate everyone, who cooperated with us - hence, our regular purchasers bring in the most acceptable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such clients, and we constantly sign new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Turkmenistan, Senegal, Yemen, Turkey, Sweden, Hungary, Rwanda, Syria, Argentina, Cameroon, Philippines, Bolivia, Kenya, Austria, Armenia, Peru, Australia, The Bahamas, Liechtenstein, Macedonia, Iran, Norway, Vietnam, Mongolia, Uzbekistan, Greece, Sierra Leone, Burundi, Libya, Ghana, Moldova, Nepal, Montenegro, Mali, Equatorial Guinea, Denmark, North Korea, Bulgaria, Jordan, East Timor, Lithuania, Pakistan. A well-shaped logistics chains and a partnership network allow us to conduct our goods anywhere in the globe quickly without discrediting product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To consult or place an order, contact us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tol. | Type | D Tol. | Type | D Tol. | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | DA (m6) DPA (p6) | JP | DC (m6) DPC (p6) | FP | DC (m6) DPC (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | BJP | BJP | BFP | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | HJP | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | - | P | - | L | - | B | ||||
Type | D Tol. | D | ||||||||
JP | DA | 8 | - | 12 | ||||||
SJP | DPC | 10 | - | 14.01 | ||||||
CFP | DC | 12 | - | P15.97 | - | L12 | - | B3.5 |
P | h6 |
1.50~3.00 | 0 -0.006 |
3.01~6.00 | 0 -0.008 |
?6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | ? | C | ||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
JP GJP BJP SJP HJP CJP | DA (m6) DPA (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 2 | 0 | 0.1 |
2 | 3 | 4 | 0.5 | ||||||
3 | 5 | 5 | 3 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 6, 8 | ||||||
5 | 8 | 8 | 4 | ||||||
6 | 8, 10 | 10 | 5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 12 | 12 | 6 | 2 | 1.5 | ||
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 16 | 20 | 20 | ||||
13 | 18 | 22 | 22 | ||||||
16 | 25 | 24 | 25 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | ? | C | ||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
JP GJP BJP SJP HJP CJP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 2 | 0 | 0.1 |
2 | 2.50~4.00 | 4 | 0.5 | ||||||
3 | 3.50~6.00 | 5 | 3 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | ||||||
5 | 5.50~8.00 | 8 | 4 | ||||||
6 | 6.50~10.00 | 10 | 5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 12 | 6 | 2 | 1.5 | ||
10 | 11.00~15.00 | 16 | 10 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 20 | 20 | ||||
13 | 14.00~18.00 | 22 | 22 | ||||||
16 | 17.00~25.00 | 24 | 25 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ? | C | ||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
FP GFP BFP SFP HFP CFP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0 | 0.1 |
2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | |||||
3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | ||||
5 | 5.50~8.00 | 5~10 | 2.0~10.0 | ||||||
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 2 | 1.5 | ||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | ||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 |