We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPBTD6T-P[6.5-10/0.01]-L[9-12/1]-B[2-12/0.1]
Description
Large Head/Round/Tapped/P Standard
Stock availability:
On request
If you are questing MISUMI SFPBTD6T-P[6.5-10/0.01]-L[9-12/1]-B[2-12/0.1], communicate with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of goods and personalseparate attention to each client. We appreciate everyone, who conspired with us - so, our regular purchasers get the most flexible purchase forms and discounts on the industrial equipment market. At present, there are more than 4 thousand such customers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the planet Germany, United Kingdom, El Salvador, Morocco, Côte d\'Ivoire, New Zealand, Suriname, Equatorial Guinea, Seychelles, Lesotho, Mexico, Iraq, Mauritania, Cyprus, Denmark, Armenia, Cape Verde, Brunei, Albania, Mali, Syria, Ecuador, Angola, Luxembourg, Dominica, China, Kiribati, Pakistan, Ireland, Nicaragua, Philippines, Madagascar, Swaziland, Belarus, Uganda, Kuwait, Guatemala, Russia, Bolivia, United Arab Emirates, Nepal, Croatia, Sierra Leone, United States, Brazil. A well-shaped logistics series and a partnership network help us to ship our goods anywhere in the earth immediately without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are happy that customers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, call us by phone or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | BTB (Round) DTB (Diamond) | JP | BTA (Round) BTD (Diamond) | FP | BTA (Round) BTD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | - | BJP (Round only) | - | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | - | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | P | - | L | - | B | |||||
- | ||||||||||
Type | Shape | D | ||||||||
JP | BTB | 6 | - | 8 | ||||||
JP | BTA | 10 | - | 12.10 | ||||||
FP | BTA | 10 | - | P11.01 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||||||||||
JP GJP SJP HJP CJP | BTB (Round) DTB (Diamond) | ?6 | -0.004 -0.012 | 8 | 10 | 10 | 8 | 3 | 3 | M3 | ?147 | 5 | |||||||
?6T | 8 | 10 | M2.6 | - | 4 | ||||||||||||||
?8 | -0.005 -0.014 | 10 | 12 | 13 | 15 | 4 | 3.5 | M5 | ?676 | 8 | |||||||||
?8T | 10 | 12 | 13 | M4 | ?333 | 6 | |||||||||||||
10 | 12 | 13 | 15 | 10 | 4 | M5 | ?676 | 8 | |||||||||||
12 | -0.006 -0.017 | 13 | 15 | 16 | 5 | ||||||||||||||
13 | 15 | 16 | 22 | 5.5 | M8 | 2803 | 12 | ||||||||||||
16 | 20 | 25 | 5 | 7 | |||||||||||||||
20 | -0.007 -0.020 | 25 | 30 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JP GJP BJP SJP CJP | BTA (Round) BTD (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | 3 | 2.2 | M2 | - | 3 |
?6 | 6.50~10.00 | 8 | 3 | M3 | ?147 | 5 | |||||
?6T | 6.50~10.00 | M2.6 | - | 4 | |||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 15 | 4 | 3.5 | M5 | ?676 | 8 | |||
?8T | 9.00~13.00 | M4 | ?333 | 6 | |||||||
10 | 11.00~15.00 | 10 | 4 | M5 | ?676 | 8 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | ||||||||
13 | 14.00~18.00 | 22 | 5.5 | M8 | 2803 | 12 | |||||
16 | 17.00~25.00 | 5 | 7 | ||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FP GFP SFP HFP CFP | BTA (Round) BTD (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~12.0 | 3 | 2.2 | M2 | - | ?3 |
?6 | ?6.50~10.00 | 6(9)~12 | 3 | M3 | ?147 | ?5 | |||||
?6T | M2.6 | - | ?4 | ||||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | 8(12)~16 | 2.0~15.0 | 4 | 3.5 | M5 | ?676 | ?8 | ||
?8T | 6(12)~16 | M4 | ?333 | ?6 | |||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | 4 | M5 | ?676 | ?8 | ||||
10T | 6(12)~16 | M4 | ?333 | ?6 | |||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | M5 | ?676 | ?8 | |||
12T | 8(12)~18 | M4 | ?333 | ?6 | |||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | 5.5 | M8 | 2803 | 10 | ||||
13T | 8(14)~20 | M6 | 1156 | ?9 | |||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 5 | 7 | M8 | 2803 | 12 | |||
16T | 10(14)~24 | M6 | 1156 | ?9 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | ?9 |