We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MIKFB150-75
Description
Angle Plates/Cast Iron/Standard Dimensions/No Holes
Stock availability:
On request
If you are questing MISUMI MIKFB150-75, communicate with FAMAGA, the world's top company of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of products and individual attention to each buyer. We cherish everyone, who collaborated with us - so, our regular buyers get the most attractive purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such clients, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Libya, Portugal, Lesotho, Moldova, The Bahamas, Tunisia, Myanmar, Chile, Malta, Andorra, Kuwait, Ghana, Japan, Liberia, New Zealand, Kiribati, Malaysia, Argentina, Malawi, Israel, Madagascar, Gambia, Botswana, Suriname, Kyrgyzstan, Czech Republic, Latvia, Iran, Sudan, Turkmenistan, Belize, Senegal, Samoa, Equatorial Guinea, Bolivia, Iceland, Tanzania, Turkey, Antigua and Barbuda, Iraq, Slovakia, Austria, Finland. A advanced logistics chains and a partnership network assist us to send our products anywhere in the planet immediately without discrediting product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this amount is increasing every day. We are happy that clients choose FAMAGA again and again, and we are glad to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To consult or book, phone us or write a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Hole Machining Selection | Material | Surface Treatment |
IK | FB (No Hole) D (Through Hole Diameter Fixed Type) DM (Through Hole Diameter Selectable Type) K (Through Hole and Dowel Hole Diameter Fixed Type) KM (Through Hole and Dowel Hole Diameter Selectable Type) | EN-JL 1040 Equiv. | Primer Paint (Gray) |
BIK | Black Oxide | ||
MIK | Electroless Nickel Plating |
Part Number | - | A | - | N | - | D |
IKFB350 IKDM100 BIKKM200 | - - - | 150 100 120 | - - | N10 N12 | - | D8 |
Part Number | A | Angle Plate Body | Unit Price | |||||
No Hole | ||||||||
Type | H | W | T | T1 | IKFB | BIKFB | MIKFB | |
No Hole IKFB BIKFB MIKFB | 60 | 40 | 30 | 8 | 6 | |||
100 | 40 | 30 | 8 | 6 | ||||
50S | 50 | 15 | 8 | |||||
50 | 100 | 14 | ||||||
100 | ||||||||
150 | 50 | 50 | 15 | 8 | ||||
70 | 100 | 14 | ||||||
75 | 75 | |||||||
100 | 100 | |||||||
200 | 75 | 75 | 15 | 14 | ||||
120 | 100 | |||||||
250 | 120 | 100 | 18 | 15 | ||||
300 | 150 | |||||||
350 | 150 | |||||||
400 | 150 |
Part Number | A | Angle Plate Body | Through Hole | Unit Price | |||||||||||||
Through Hole Diameter Fixed | Through Hole Diameter Selectable | ||||||||||||||||
Type | H | W | T | T1 | N | N (Selection) | B | X | F | Y | G | IKD | BIKD | MIKD | IKDM | MIKDM | |
Through Holes (Through Hole Diameter Fixed) IKD BIKD MIKD (Through Hole Diameter Selectable) *2 IKDM MIKDM | 60 | 40 | 30 | 8 | 6 | 3.5 | - | 20 | 15 | 15 | 30 | 20 | - | - | |||
100 | 40 | 30 | 8 | 6 | 3.5 | - | 20 | 15 | 15 | 55 | 30 | - | - | ||||
50S | 50 | 15 | 8 | 9 | 10 12 14 | 30 | 35 | - | |||||||||
50 | 100 | 14 | 11 | 70 | 45 | 40 | |||||||||||
100 | 45 | 40 | |||||||||||||||
150 | 50 | 50 | 15 | 8 | 9 | 30 | 35 | - | 75 | 60 | |||||||
70 | 100 | 14 | 11 | 70 | 40 | ||||||||||||
75 | 75 | 50 | |||||||||||||||
100 | 100 | 70 | 45 | 40 | |||||||||||||
200 | 75 | 75 | 15 | 14 | 11 | 50 | 40 | - | 110 | 70 | |||||||
120 | 100 | 70 | 50 | 50 | |||||||||||||
250 | 120 | 100 | 18 | 15 | 11 | 70 | 50 | 50 | 140 | 90 | |||||||
300 | 150 | 40 | 90 | 190 | |||||||||||||
350 | 150 | 230 | 100 | ||||||||||||||
400 | 150 | 260 | 120 |
Part Number | A | Angle Plate Body | Through Hole | Dowel Hole | Unit Price | ||||||||||||||||
Through Hole and Dowel Hole Diameter Fixed | Through Hole Diameter Selectable | ||||||||||||||||||||
Type | H | W | T | T1 | N | N (Selection) | B | X | F | Y | G | DH7 | DH7 (Selection) | a | h | IKK | BIKK | MIKK | IKKM | BIKKM | |
Through Holes and Dowel Holes (Through Hole and Dowel Hole Diameter Fixed) IKK BIKK MIKK (Through Hole and Dowel Hole Diameter Selectable) *3 IKKM BIKKM | 60 | 40 | 30 | 8 | 6 | 3.5 | - | 20 | 15 | 15 | 30 | 20 | 3 | - | - | 40 | - | - | |||
100 | 40 | 30 | 8 | 6 | 3.5 | - | 20 | 15 | 15 | 55 | 30 | 3 | - | - | 70 | - | - | ||||
50S | 50 | 15 | 8 | 9 | 10 12 14 | 30 | 35 | - | 6 | 6 8 10 | |||||||||||
50 | 100 | 14 | 11 | 70 | 45 | 40 | 10 | 65 | |||||||||||||
100 | 45 | 40 | 65 | ||||||||||||||||||
150 | 50 | 50 | 15 | 8 | 9 | 30 | 35 | - | 75 | 60 | 6 | - | 105 | ||||||||
70 | 100 | 14 | 11 | 70 | 40 | 10 | 55 | ||||||||||||||
75 | 75 | 50 | |||||||||||||||||||
100 | 100 | 70 | 45 | 40 | 65 | ||||||||||||||||
200 | 75 | 75 | 15 | 14 | 11 | 50 | 40 | - | 110 | 70 | 10 | 55 | 145 | ||||||||
120 | 100 | 70 | 50 | 50 | 75 | ||||||||||||||||
250 | 120 | 100 | 18 | 15 | 11 | 70 | 50 | 50 | 140 | 90 | 10 | 75 | 185 | ||||||||
300 | 150 | 40 | 90 | 190 | 85 | 235 | |||||||||||||||
350 | 150 | 230 | 100 | 280 | |||||||||||||||||
400 | 150 | 260 | 120 | 320 |