We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MCFPQTD5-P[5.5-8/0.01]-L[9-10/1]-B[2-10/0.1]
Description
Spherical Large Head/Tapped/P Configurable
Stock availability:
On request
If you are questing MISUMI MCFPQTD5-P[5.5-8/0.01]-L[9-10/1]-B[2-10/0.1], communicate with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of outcomes and individual attention to each buyer. We praise everyone, who liased with us - so, our regular customers procure the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Australia, Liechtenstein, Russia, Costa Rica, Panama, Algeria, Papua New Guinea, Mali, Haiti, Brunei, Canada, Seychelles, Tajikistan, Guyana, Slovakia, Netherlands, Turkey, Burkina Faso, Djibouti, United States, Serbia, South Sudan, Kuwait, Iran, Turkmenistan, Ireland, Czech Republic, Latvia, Afghanistan, Belarus, India, Syria, Kiribati, Benin, Finland, Georgia, Samoa, Pakistan, Cameroon, Estonia, Malaysia. A well-developed logistics network and a partnership network let us to send our products anywhere in the world immediately without damaging product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as stay in control.
To request or place an order, phone us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQT | GFPQT | ||||
EN 1.4301 Equiv.* | - | - | SJPQT | SJPQT | SFPQT | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQT | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQT | CJPQT | CFPQT | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQT | MFPQT | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQT | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQT | MCFPQT |
Part Number | - | P | - | L | - | B |
JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | ? | ||||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPQT SJPQT CJPQT | BB (Round) | ?6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | ?8 | M3 | ?147 | ?5 | ||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | ?676 | ?8 | ||||||||||||
10 | 11 | 12 | 13 | 15 | 10 | |||||||||||||||||
12 | -0.006 -0.017 | 15 | 16 | |||||||||||||||||||
16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | ? | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | ?6 | M2 | - | 3 | 2.2 |
6 | ?6.50~10.00 | ?8 | M3 | ?147 | 5 | 3 | ||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | ?9.00~13.00 | 15 | M5 | ?676 | 8 | 3.5 | |||
8T | M4 | ?333 | 6 | |||||||
10 | 11.00~15.00 | 10 | M5 | ?676 | 8 | 4 | ||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | |||||||
13 | 14.00~18.00 | 22 | M8 | 2803 | 10 | 5.5 | ||||
16 | 17.00~25.00 | 12 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | ? | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5(9)~10 | 2.0~10.0 | M2 | - | ?3 | 2.2 |
?6 | ?6.50~10.00 | ?6(9)~12 | 2.0~12.0 | M3 | ?147 | ?5 | 3 | |||
?6T | M2.6 | - | ?4 | |||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?8(12)~16 | 2.0~15.0 | M5 | ?676 | ?8 | 3.5 | ||
?8T | ?6(12)~16 | M4 | ?333 | ?6 | ||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | ?676 | ?8 | 4 | |||
10T | ?6(12)~16 | M4 | ?333 | ?6 | ||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | M5 | ?676 | ?8 | 5 | ||
12T | ?8(12)~18 | M4 | ?333 | ?6 | ||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 5.5 | |||
13T | ?8(14)~20 | M6 | 1156 | ?9 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 7 | |||
16T | 10(14)~24 | M6 | 1156 | ?9 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | 9 | ||
20T | 12(18)~30 | M6 | 1156 | ?9 |