We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PSAGS12-[25-995/1]-F[5-30/1]-MMS10-SC[0-985/1]
Description
One End Threaded with Undercut and Wrench Flats/Cross-Drilled Hole
Stock availability:
On request
If you are pursuing MISUMI PSAGS12-[25-995/1]-F[5-30/1]-MMS10-SC[0-985/1], catch up with FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and special attention to each orderer. We admire everyone, who conspired with us - so, our regular consumers bring in the most flexible purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the earth Germany, United Kingdom, Eritrea, Uganda, Belgium, Burma, Colombia, Chile, Greece, The Bahamas, Hungary, Madagascar, Kiribati, Bulgaria, East Timor, Niger, Moldova, Thailand, Nicaragua, Norway, Ghana, Macedonia, El Salvador, Turkmenistan, Burundi, Mauritania, Equatorial Guinea, China, Turkey, United Arab Emirates, Austria, Georgia, Senegal, Algeria, Azerbaijan, Bangladesh, Kyrgyzstan, North Korea, Zambia, Philippines, Namibia, Tunisia, Kenya. A well-developed logistics link and a partnership network assist us to dispatch our products anywhere in the globe quickly without discrediting product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been supplied, and this quantity is growing every day. We are glad that clients choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as keep on top of it.
To consult or make a request, contact us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Hardness | Surface Treatment | ||||
With Wrench Flats | With Cross-Drilled Hole | ||||||
D Tol. g6 | D Tol. h5 | D Tol. f8 | D Tol. g6 | D Tol. f8 | |||
SAFS | SFSU | - | SFHS | - | EN 1.3505 Equiv. | Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4125 Equiv. 56HRC~ | - |
SSAFS | SSFSU | - | SSHFS | - | EN 1.4125 Equiv. | ||
PSAFS | PSFSU | - | PSHFS | - | EN 1.3505 Equiv. | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
PSSAFS | PSSFSU | - | PSSHFS | - | EN 1.4125 Equiv. | ||
RSAFS | - | - | RSHFS | - | EN 1.3505 Equiv. | LTBC Plating | |
- | - | PSAGS | - | PSHGS | EN 1.1191 Equiv. | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
- | - | PSSAGS | - | - | EN 1.4301 Equiv. |
Part Number | - | L | - | F | - | M | - | SC | - | H |
SAFS13 | - | 800 | - | F23 | - | M10 | ||||
SSHFS20 | - | 450 | - | F28 | - | M12 | - | H15 | ||
Part Number | 1mm Increment | Selection | Wrench Flats Dimensions | D Tol. | (Y)Max. | C | ||||||||||||||
Type | D | L | F | M (Coarse) | SC | W | 1 | g6 | h5 | f8 | ||||||||||
(With Wrench Flats) (D Tolerance g6) SAFS SSAFS PSAFS PSSAFS (D Tolerance f8) PSAGS PSSAGS | (D Tolerance h5) SFSU SSFSU PSFSU PSSFSU | 8 | 25~795 | 5FMx3 F-(g)Pitchx3 | 6 | SC=1mm Increment SC+1L SC0 Details of Wrench Flats >>P.112 | 7 | 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 800 | 0.5 or Less | |||||||
10 | 25~795 | 6 | 8 | 8 | 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 800 | 0.5 or Less | ||||||||||
12 | 25~995 | 6 | 8 | 10 | 10 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.5 or Less | |||||||||
13 | 25~995 | 6 | 8 | 10 | 12 | 11 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.5 or Less | ||||||||
15 | 25~995 | 6 | 8 | 10 | 12 | 13 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.5 or Less | ||||||||
16 | 25~1195 | 6 | 8 | 10 | 12 | 14 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1200 | 0.5 or Less | ||||||||
18 | 25~1195 | 6 | 8 | 10 | 12 | 16 | 16 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1200 | 0.5 or Less | |||||||
20 | 25~1195 | 6 | 8 | 10 | 12 | 16 | 17 | 10 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1200 | 1.0 or Less | |||||||
25 | 25~1195 | 8 | 10 | 12 | 16 | 20 | 24 | 22 | 10 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1200 | 1.0 or Less | ||||||
30 | 25~1495 | 8 | 10 | 12 | 16 | 20 | 24 | 27 | 15 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1500 | 1.0 or Less | ||||||
35 | 25~1495 | 10 | 12 | 16 | 20 | 24 | 30 | 30 | 15 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 1.0 or Less | ||||||
40 | 25~1495 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 1.0 or Less | |||||||
50 | 25~1495 | 16 | 20 | 24 | 30 | 41 | 20 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 1.0 or Less |
Part Number | 1mm Increment | Selection | Wrench Flats Dimensions | D Tol. | (Y)Max. | C | ||||||||||
Type | D | L | F | M (Coarse) | SC | W | 1 | g6 | ||||||||
(With Wrench Flats) (D Tolerance g6) LTBC Plating RSAFS | 8 | 25~500 | 5FMx3 F-(g)Pitchx3 | 6 | SC=1mm Increment SC+1L SC0 Details of Wrench Flats >>P.112 | 7 | 8 | -0.005 -0.014 | 800 | 0.5 or Less | ||||||
10 | 25~500 | 6 | 8 | 8 | 8 | -0.005 -0.014 | 800 | 0.5 or Less | ||||||||
12 | 25~500 | 6 | 8 | 10 | 10 | 10 | -0.006 -0.017 | 1000 | 0.5 or Less | |||||||
13 | 25~500 | 6 | 8 | 10 | 12 | 11 | 10 | -0.006 -0.017 | 1000 | 0.5 or Less | ||||||
15 | 25~500 | 6 | 8 | 10 | 12 | 13 | 10 | -0.006 -0.017 | 1000 | 0.5 or Less | ||||||
16 | 25~500 | 6 | 8 | 10 | 12 | 14 | 10 | -0.006 -0.017 | 1200 | 0.5 or Less | ||||||
18 | 25~500 | 6 | 8 | 10 | 12 | 16 | 16 | 10 | -0.006 -0.017 | 1200 | 0.5 or Less | |||||
20 | 25~500 | 6 | 8 | 10 | 12 | 16 | 17 | 10 | -0.007 -0.020 | 1200 | 1.0 or Less | |||||
25 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | 22 | 10 | -0.007 -0.020 | 1200 | 1.0 or Less | ||||
30 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | 27 | 15 | -0.007 -0.020 | 1500 | 1.0 or Less |
Part Number | 1mm Increment | Selection | Cross-Drilled Hole Dimensions | D Tol. | (Y)Max. | C | ||||||||||
Type | D | L | F | M (Coarse) | H | d | g6 | f8 | ||||||||
(With Cross-Drilled Hole) (D Tolerance g6) SFHS SSHFS PSHFS PSSHFS RSHFS (D Tolerance f8) PSHGS | 8 | 25~500 | 5FMx3 F-(g)Pitchx3 | 6 | H=1mm Increment LH+d/2+2 Hd/2+2 | 3 | -0.005 -0.014 | -0.013 -0.035 | 800 | 0.5 or Less | ||||||
10 | 25~500 | 6 | 8 | 3 | -0.005 -0.014 | -0.013 -0.035 | 800 | 0.5 or Less | ||||||||
12 | 25~500 | 6 | 8 | 10 | 3 | -0.006 -0.017 | -0.016 -0.043 | 1000 | 0.5 or Less | |||||||
13 | 25~500 | 6 | 8 | 10 | 12 | 4 | -0.006 -0.017 | -0.016 -0.043 | 1000 | 0.5 or Less | ||||||
15 | 25~500 | 6 | 8 | 10 | 12 | 4 | -0.006 -0.017 | -0.016 -0.043 | 1000 | 0.5 or Less | ||||||
16 | 25~500 | 6 | 8 | 10 | 12 | 4 | -0.006 -0.017 | -0.016 -0.043 | 1200 | 0.5 or Less | ||||||
18 | 25~500 | 6 | 8 | 10 | 12 | 16 | 6 | -0.006 -0.017 | -0.016 -0.043 | 1200 | 0.5 or Less | |||||
20 | 25~500 | 6 | 8 | 10 | 12 | 16 | 6 | -0.007 -0.020 | -0.020 -0.053 | 1200 | 1.0 or Less | |||||
25 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | 7 | -0.007 -0.020 | -0.020 -0.053 | 1200 | 1.0 or Less | ||||
30 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | 7 | -0.007 -0.020 | -0.020 -0.053 | 1500 | 1.0 or Less |