We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HJPGTS16-P[10-25/0.01]-L[8-32/1]-B[5-20/0.1]
Description
Setscrew Mounting Shank/Circumference Groove
Stock availability:
On request
If you are pursuing MISUMI HJPGTS16-P[10-25/0.01]-L[8-32/1]-B[5-20/0.1], communicate with FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each consumer. We value everyone, who engaged with us - so, our regular consumers accept the most attractive purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Guatemala, Tunisia, Sweden, Bhutan, Morocco, Belgium, Central African Republic, Slovenia, East Timor, Costa Rica, Oman, Samoa, Monaco, Fiji, Chile, Djibouti, Estonia, Mexico, Malaysia, Eritrea, Angola, Netherlands, Serbia, Norway, Vietnam, China, Zambia, Ireland, Burkina Faso, Hungary, Pakistan, Panama, Kuwait, Benin, Argentina, Switzerland, Austria, Nepal, Poland, Tajikistan, Iraq. A advanced logistics network and a partnership network assist us to dispatch our products anywhere in the planet on-time without undermining product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of factory-made equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To consult or place an order, phone us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGT | JPCT | JPDT | S (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPGT | GJPCT | GJPDT | ||
EN 1.4301 Equiv. | - | - | SJPGT | - | SJPDT | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJPGT | HJPCT | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPGT | CJPCT | CJPDT |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGTS10 JPDTD10 | - - | P12.00 P10.05 | - - | L6 L22 | - - | B3.5 B7.5 | - | G5 | - | A14.3 | - | X |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | m | C1 | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | ||||||||
JPGT GJPGT SJPGT HJPGT CJPGT | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~10.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 3 | 1 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | ||||||||||
8 | -0.005 -0.014 | 3.00~13.00 | 4~16 | 6.5 | 6 | 6 | 4 | 1.5 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | ||||||||||
10 | 3.00~15.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 4 | 2.2 | ||||
10S | 4~20 | 3 | 0.5 | ||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 6~24 | 10 | 8 | 2 | 5 | 2.5 | |||||
12S | 5~24 | 4 | 0.5 | ||||||||||
16 | 10.00~25.00 | 8~32 | 5.0~20.0 | 14 | 8 | 5 | 3 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | ||||||||||
20 | -0.007 -0.020 | 13.00~30.00 | 10~40 | 18 | 8 | 3 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | C | m | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | ||||||||||||||
(Notched) JPCT GJPCT HJPCT CJPCT | (Set Screw Flat) JPDT GJPDT SJPDT CJPDT | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~10.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Applicable to Diamond Shape Type only. | 5.5 | 2.5 | 1.0 | 1 | 3 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~13.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | 4 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~15.00 | 15~25 | 2.0~16.0 | 2 | M6 | 1156 | 4 | 2.2 | |||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 15~25 | 2.0~20.0 | 5 | 2.5 | |||||||||||||
16 | 10.00~25.00 | 15~35 | 2.0~28.0 | 10.5 | 5.5 | 2.0 | 3 | 5 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~30.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 9 | 5 |