We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HJPGTD10S-P[3-15/0.01]-L[4-20/1]-B[3-20/0.1]
Description
Setscrew Mounting Shank/Circumference Groove
Stock availability:
On request
If you are inspecting MISUMI HJPGTD10S-P[3-15/0.01]-L[4-20/1]-B[3-20/0.1], reach FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of spare parts and particular attention to each consumer. We admire everyone, who engaged with us - so, our regular clients accept the most beneficial purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such customers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Mozambique, Eswatini, Bahamas, Zimbabwe, Uzbekistan, Costa Rica, Saudi Arabia, Sierra Leone, Palestine, Burma, The Bahamas, Egypt, El Salvador, Eritrea, Jamaica, Paraguay, Albania, Pakistan, Swaziland, Bolivia, Fiji, Turkmenistan, South Sudan, Benin, Nigeria, Estonia, Finland, Brazil, Poland, Afghanistan, Austria, Mauritania, China, East Timor, Burkina Faso, Israel, Luxembourg, Thailand, Mauritius, Madagascar, Qatar, Malaysia. A advanced logistics system and a partnership network let us to deliver our products anywhere in the world immediately without disreputing product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, phone us or write to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGT | JPCT | JPDT | S (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPGT | GJPCT | GJPDT | ||
EN 1.4301 Equiv. | - | - | SJPGT | - | SJPDT | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJPGT | HJPCT | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPGT | CJPCT | CJPDT |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGTS10 JPDTD10 | - - | P12.00 P10.05 | - - | L6 L22 | - - | B3.5 B7.5 | - | G5 | - | A14.3 | - | X |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | m | C1 | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | ||||||||
JPGT GJPGT SJPGT HJPGT CJPGT | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~10.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 3 | 1 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | ||||||||||
8 | -0.005 -0.014 | 3.00~13.00 | 4~16 | 6.5 | 6 | 6 | 4 | 1.5 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | ||||||||||
10 | 3.00~15.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 4 | 2.2 | ||||
10S | 4~20 | 3 | 0.5 | ||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 6~24 | 10 | 8 | 2 | 5 | 2.5 | |||||
12S | 5~24 | 4 | 0.5 | ||||||||||
16 | 10.00~25.00 | 8~32 | 5.0~20.0 | 14 | 8 | 5 | 3 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | ||||||||||
20 | -0.007 -0.020 | 13.00~30.00 | 10~40 | 18 | 8 | 3 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | C | m | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | ||||||||||||||
(Notched) JPCT GJPCT HJPCT CJPCT | (Set Screw Flat) JPDT GJPDT SJPDT CJPDT | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~10.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Applicable to Diamond Shape Type only. | 5.5 | 2.5 | 1.0 | 1 | 3 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~13.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | 4 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~15.00 | 15~25 | 2.0~16.0 | 2 | M6 | 1156 | 4 | 2.2 | |||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 15~25 | 2.0~20.0 | 5 | 2.5 | |||||||||||||
16 | 10.00~25.00 | 15~35 | 2.0~28.0 | 10.5 | 5.5 | 2.0 | 3 | 5 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~30.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 9 | 5 |