We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HJPCTS20-P[13-30/0.01]-L[27-40/1]-B[5-40/0.1]
Description
Setscrew Mounting Shank/Circumference Groove
Stock availability:
On request
If you are looking for MISUMI HJPCTS20-P[13-30/0.01]-L[27-40/1]-B[5-40/0.1], reach FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and personalseparate attention to each buyer. We esteem everyone, who liased with us - so, our regular buyers procure the most beneficial purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Comoros, Norway, Slovenia, Guinea-Bissau, Liechtenstein, Zimbabwe, Liberia, Cuba, Lebanon, Bhutan, Nicaragua, Belarus, The Gambia, Japan, Croatia, Kazakhstan, Samoa, Benin, Nepal, Djibouti, Russia, Azerbaijan, El Salvador, Ireland, Mongolia, Serbia, Pakistan, Slovakia, Seychelles, Madagascar, Ghana, Burkina Faso, Estonia, Costa Rica, Poland, Kyrgyzstan, Peru, Australia, Haiti, Brunei, Panama, Cyprus. A well-built logistics link and a partnership network assist us to send our products anywhere in the planet on-time without damaging product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is amounting every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, contact us or write to the online chat on our official website. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGT | JPCT | JPDT | S (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPGT | GJPCT | GJPDT | ||
EN 1.4301 Equiv. | - | - | SJPGT | - | SJPDT | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJPGT | HJPCT | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPGT | CJPCT | CJPDT |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGTS10 JPDTD10 | - - | P12.00 P10.05 | - - | L6 L22 | - - | B3.5 B7.5 | - | G5 | - | A14.3 | - | X |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | m | C1 | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | ||||||||
JPGT GJPGT SJPGT HJPGT CJPGT | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~10.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 3 | 1 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | ||||||||||
8 | -0.005 -0.014 | 3.00~13.00 | 4~16 | 6.5 | 6 | 6 | 4 | 1.5 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | ||||||||||
10 | 3.00~15.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 4 | 2.2 | ||||
10S | 4~20 | 3 | 0.5 | ||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 6~24 | 10 | 8 | 2 | 5 | 2.5 | |||||
12S | 5~24 | 4 | 0.5 | ||||||||||
16 | 10.00~25.00 | 8~32 | 5.0~20.0 | 14 | 8 | 5 | 3 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | ||||||||||
20 | -0.007 -0.020 | 13.00~30.00 | 10~40 | 18 | 8 | 3 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | C | m | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | ||||||||||||||
(Notched) JPCT GJPCT HJPCT CJPCT | (Set Screw Flat) JPDT GJPDT SJPDT CJPDT | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~10.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Applicable to Diamond Shape Type only. | 5.5 | 2.5 | 1.0 | 1 | 3 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~13.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | 4 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~15.00 | 15~25 | 2.0~16.0 | 2 | M6 | 1156 | 4 | 2.2 | |||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 15~25 | 2.0~20.0 | 5 | 2.5 | |||||||||||||
16 | 10.00~25.00 | 15~35 | 2.0~28.0 | 10.5 | 5.5 | 2.0 | 3 | 5 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~30.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 9 | 5 |