We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HJPCTS12-P[5-16/0.01]-L[15-25/1]-B[5-20/0.1]
Description
Setscrew Mounting Shank/Circumference Groove
Stock availability:
On request
If you are pursuing MISUMI HJPCTS12-P[5-16/0.01]-L[15-25/1]-B[5-20/0.1], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each user. We value everyone, who collaborated with us - so, our regular consumers pick up the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Mexico, Kenya, Colombia, Sri Lanka, Azerbaijan, Tajikistan, Gambia, Bahamas, Burma, Grenada, Fiji, Burkina Faso, Georgia, Monaco, Malaysia, Ghana, Pakistan, United States, Morocco, China, El Salvador, Ecuador, Angola, Guatemala, Laos, Peru, Botswana, Chile, Comoros, Indonesia, Montenegro, South Korea, Luxembourg, Haiti, Mozambique, Czech Republic, Albania, New Zealand, Zimbabwe, Yemen, United Arab Emirates, Panama. A well-elaborated logistics chains and a partnership network assist us to deliver our units anywhere in the earth with no delay without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is rising every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGT | JPCT | JPDT | S (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPGT | GJPCT | GJPDT | ||
EN 1.4301 Equiv. | - | - | SJPGT | - | SJPDT | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJPGT | HJPCT | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPGT | CJPCT | CJPDT |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGTS10 JPDTD10 | - - | P12.00 P10.05 | - - | L6 L22 | - - | B3.5 B7.5 | - | G5 | - | A14.3 | - | X |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | m | C1 | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | ||||||||
JPGT GJPGT SJPGT HJPGT CJPGT | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~10.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 3 | 1 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | ||||||||||
8 | -0.005 -0.014 | 3.00~13.00 | 4~16 | 6.5 | 6 | 6 | 4 | 1.5 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | ||||||||||
10 | 3.00~15.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 4 | 2.2 | ||||
10S | 4~20 | 3 | 0.5 | ||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 6~24 | 10 | 8 | 2 | 5 | 2.5 | |||||
12S | 5~24 | 4 | 0.5 | ||||||||||
16 | 10.00~25.00 | 8~32 | 5.0~20.0 | 14 | 8 | 5 | 3 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | ||||||||||
20 | -0.007 -0.020 | 13.00~30.00 | 10~40 | 18 | 8 | 3 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | C | m | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | ||||||||||||||
(Notched) JPCT GJPCT HJPCT CJPCT | (Set Screw Flat) JPDT GJPDT SJPDT CJPDT | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~10.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Applicable to Diamond Shape Type only. | 5.5 | 2.5 | 1.0 | 1 | 3 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~13.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | 4 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~15.00 | 15~25 | 2.0~16.0 | 2 | M6 | 1156 | 4 | 2.2 | |||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 15~25 | 2.0~20.0 | 5 | 2.5 | |||||||||||||
16 | 10.00~25.00 | 15~35 | 2.0~28.0 | 10.5 | 5.5 | 2.0 | 3 | 5 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~30.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 9 | 5 |