We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
BFPDTC10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1]
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
If you are pursuing MISUMI BFPDTC10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1], communicate with FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each customer. We cherish everyone, who worked with us - so, our regular consumers receive the most attractive purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Belgium, Botswana, Niger, Malta, Estonia, Kenya, Honduras, Monaco, Egypt, Afghanistan, Dominica, China, Netherlands, Guyana, Seychelles, Pakistan, Argentina, Indonesia, Antigua and Barbuda, Latvia, Laos, United Arab Emirates, Malaysia, Cyprus, Macedonia, South Korea, Yemen, Sudan, Fiji, Belize, Tajikistan, Iran, United States, Bosnia and Herzegovina, Cape Verde, Zambia, Switzerland, Senegal, Zimbabwe, Suriname, Serbia, Samoa. A well-built logistics connection and a partnership network allow us to ship our goods anywhere in the world quickly without compromising product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To inquire or place an order, contact us or write to the online chat on our official website. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDTA GJPDTA SJPDTA CJPDTA | 6 | -0.004 -0.012 | 8, 10 | 10 | 5 | M3 | 147 | 5 | 1 |
8 | -0.005 -0.014 | 12 | 12 | 6 | M5 | 676 | 8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 25 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
JPDTC GJPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 8 | 4 | M2 | - | 3 | 1 |
6 | 6.50~10.00 | 10 | 5 | M3 | 147 | 5 | |||
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 12 | 6 | M5 | 676 | 8 | 1.5 | |
8T | M4 | 333 | 6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | 676 | 8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | C | |||
Type | D | D dim. Tolerance g6 | |||||||
FPDTC GFPDTC BFPDTC SFPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | M2 | - | 3 | 1 |
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 147 | 5 | |||
6T | M2.6 | - | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 676 | 8 | 1.5 | |
8T | 6~16 | M4 | 333 | 6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | 676 | 8 | 2 | ||
10T | 6~16 | M4 | 333 | 6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | 676 | 8 | ||
12T | 8~18 | M4 | 333 | 6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
13T | 8~20 | M6 | 1156 | 9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
16T | 10~24 | M6 | 1156 | 9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | 9 |