We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LPDARB4-P[5-9/0.01]-B[5-10/0.1]-G[1-9/1]-L[0-10/1]
Description
Selectable Pilot Shape/Threaded
Stock availability:
On request
If you are questing MISUMI LPDARB4-P[5-9/0.01]-B[5-10/0.1]-G[1-9/1]-L[0-10/1], reach FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and personalseparate attention to each buyer. We praise everyone, who engaged with us - so, our regular purchasers obtain the most attractive purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Oman, South Korea, The Gambia, Netherlands, Vietnam, Japan, Russia, Argentina, Malaysia, Nicaragua, Cameroon, Montenegro, Bangladesh, Romania, Niger, Switzerland, Tonga, Pakistan, Chad, Bolivia, Brunei, Kuwait, The Bahamas, Indonesia, Belarus, Brazil, Mauritania, Comoros, Nepal, Bosnia and Herzegovina, Croatia, Botswana, Kenya, Costa Rica, Namibia, Swaziland, Madagascar, Kiribati, Guatemala, Finland, Dominica, Algeria. A well-elaborated logistics series and a partnership network let us to dispatch our products anywhere in the planet on-time without damaging product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been provided, and this amount is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To request or order, phone us or send a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Round | Diamond |
EN 1.2510 Equiv. | - | Treated Hardness: 55 ~ 60HRC | LPAJ | LPDAJ | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | LPAG | LPDAG | |
EN 1.1191 Equiv. | - | Treated Hardness: 45 ~ 50HRC | LPA | LPDA | |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LPAB | LPDAB | |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | LPAR | LPDAR | |
EN 1.4301 Equiv. | - | - | LPAS | LPDAS | |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | LPAD | LPDAD | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LPAC | - |
Part Number | - | P | - | B | - | R | - | G | - | L |
LPAA5 LPAJB10 | - - | P10.00 P15.00 | - - | B12.0 B17.0 | - | R6 | - | G10 | - - | L5 L10 |
Part Number | P 0.01mm Increment | B 0.1mm Increment | R 1mm Increment | G 1mm Increment | L 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | ||||
Type | Tip Shape | D | D dim. Tolerance g6 | |||||||||
A Shape, C Shape only | B Shape only | |||||||||||
(Round) LPAJ LPAG LPA LPAB LPAR LPAS LPAD LPAC | (Diamond) LPDAJ LPDAG LPDA LPDAB LPDAR LPDAS LPDAD | A B C | 3 | -0.002 -0.008 | 5.00~6.00 | 5.0~25.0(10.0) | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 0~10 | M3 | 147 | 1.5 |
4 | -0.004 -0.012 | 5.00~9.00 | 5.0~25.0(10.0) | M4 | 333 | 1.8 | ||||||
5 | 6.00~10.00 | 5.0~30.0(10.0) | M5 | 676 | 2.2 | |||||||
6 | 8.00~12.00 | 5.0~40.0(12.0) | M6 | 1156 | 3 | |||||||
8 | -0.005 -0.014 | 10.00~15.00 | 5.0~40.0(15.0) | M8 | 2803 | 3.5 | ||||||
10 | 12.00~20.00 | 5.0~50.0(20.0) | M10 | 5557 | 4 | |||||||
12 | -0.006 -0.017 | 16.00~20.00 | 5.0~50.0(20.0) | M12 | 9702 | 5 | ||||||
16 | 18.00~24.00 | 5.0~50.0(20.0) | M16 | 24108 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 5.0~50.0(20.0) | M20 | 46942 | 9 |