We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CFPBTA16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1]
Description
Large Head/Round/Tapped/P Standard
Stock availability:
On request
If you are looking for MISUMI CFPBTA16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1], reach FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and personalseparate attention to each consumer. We esteem everyone, who engaged with us - so, our regular buyers accept the most beneficial purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Nicaragua, Guinea-Bissau, Tajikistan, Belize, Colombia, Switzerland, Moldova, Latvia, Pakistan, Turkey, Finland, Poland, Mali, Madagascar, Norway, Andorra, Antigua and Barbuda, Guyana, Qatar, Djibouti, Cyprus, Nepal, Israel, Ireland, Egypt, Uruguay, El Salvador, India, Burkina Faso, South Sudan, Malaysia, Panama, Malta, East Timor, Niger, Costa Rica, Tonga, Montenegro, Jamaica, Tunisia, Comoros, Morocco. A well-elaborated logistics network and a partnership network help us to conduct our goods anywhere in the earth immediately without undermining product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as to stay on the top.
To consult or book, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | BTB (Round) DTB (Diamond) | JP | BTA (Round) BTD (Diamond) | FP | BTA (Round) BTD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | - | BJP (Round only) | - | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | - | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | P | - | L | - | B | |||||
- | ||||||||||
Type | Shape | D | ||||||||
JP | BTB | 6 | - | 8 | ||||||
JP | BTA | 10 | - | 12.10 | ||||||
FP | BTA | 10 | - | P11.01 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||||||||||
JP GJP SJP HJP CJP | BTB (Round) DTB (Diamond) | 6 | -0.004 -0.012 | 8 | 10 | 10 | 8 | 3 | 3 | M3 | 147 | 5 | |||||||
6T | 8 | 10 | M2.6 | - | 4 | ||||||||||||||
8 | -0.005 -0.014 | 10 | 12 | 13 | 15 | 4 | 3.5 | M5 | 676 | 8 | |||||||||
8T | 10 | 12 | 13 | M4 | 333 | 6 | |||||||||||||
10 | 12 | 13 | 15 | 10 | 4 | M5 | 676 | 8 | |||||||||||
12 | -0.006 -0.017 | 13 | 15 | 16 | 5 | ||||||||||||||
13 | 15 | 16 | 22 | 5.5 | M8 | 2803 | 12 | ||||||||||||
16 | 20 | 25 | 5 | 7 | |||||||||||||||
20 | -0.007 -0.020 | 25 | 30 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JP GJP BJP SJP CJP | BTA (Round) BTD (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | 3 | 2.2 | M2 | - | 3 |
6 | 6.50~10.00 | 8 | 3 | M3 | 147 | 5 | |||||
6T | 6.50~10.00 | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 15 | 4 | 3.5 | M5 | 676 | 8 | |||
8T | 9.00~13.00 | M4 | 333 | 6 | |||||||
10 | 11.00~15.00 | 10 | 4 | M5 | 676 | 8 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | ||||||||
13 | 14.00~18.00 | 22 | 5.5 | M8 | 2803 | 12 | |||||
16 | 17.00~25.00 | 5 | 7 | ||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque N•cm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FP GFP SFP HFP CFP | BTA (Round) BTD (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~12.0 | 3 | 2.2 | M2 | - | 3 |
6 | 6.50~10.00 | 6(9)~12 | 3 | M3 | 147 | 5 | |||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | 4 | 3.5 | M5 | 676 | 8 | ||
8T | 6(12)~16 | M4 | 333 | 6 | |||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | 4 | M5 | 676 | 8 | ||||
10T | 6(12)~16 | M4 | 333 | 6 | |||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | M5 | 676 | 8 | |||
12T | 8(12)~18 | M4 | 333 | 6 | |||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | 5.5 | M8 | 2803 | 10 | ||||
13T | 8(14)~20 | M6 | 1156 | 9 | |||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 5 | 7 | M8 | 2803 | 12 | |||
16T | 10(14)~24 | M6 | 1156 | 9 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |