We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CFPBTA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1]
Description
Large Head/Round/Tapped/P Standard
Stock availability:
On request
If you are inspecting MISUMI CFPBTA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each user. We cherish everyone, who collaborated with us - so, our regular clients pick up the most attractive purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such customers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Russia, Dominican Republic, Sri Lanka, Antigua and Barbuda, Oman, Djibouti, Slovakia, Brunei, United States, Australia, Botswana, Comoros, Moldova, Yemen, Macedonia, Tanzania, Malta, South Sudan, United Arab Emirates, Estonia, Vietnam, Sweden, Czech Republic, Mauritania, Burkina Faso, Bangladesh, Georgia, Iceland, Mozambique, Angola, Panama, Switzerland, Andorra, Haiti, Hungary, Tajikistan, Eswatini, Turkey, Malaysia, North Korea, Latvia, Dominica. A advanced logistics bond and a partnership network allow us to deliver our goods anywhere in the world quickly without disreputing product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is rising every day. We are happy that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as not to lower the bar.
To ask a question or book, contact us or write to the online chat on our official website. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | BTB (Round) DTB (Diamond) | JP | BTA (Round) BTD (Diamond) | FP | BTA (Round) BTD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | - | BJP (Round only) | - | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | - | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | P | - | L | - | B | |||||
- | ||||||||||
Type | Shape | D | ||||||||
JP | BTB | 6 | - | 8 | ||||||
JP | BTA | 10 | - | 12.10 | ||||||
FP | BTA | 10 | - | P11.01 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||||||||||
JP GJP SJP HJP CJP | BTB (Round) DTB (Diamond) | 6 | -0.004 -0.012 | 8 | 10 | 10 | 8 | 3 | 3 | M3 | 147 | 5 | |||||||
6T | 8 | 10 | M2.6 | - | 4 | ||||||||||||||
8 | -0.005 -0.014 | 10 | 12 | 13 | 15 | 4 | 3.5 | M5 | 676 | 8 | |||||||||
8T | 10 | 12 | 13 | M4 | 333 | 6 | |||||||||||||
10 | 12 | 13 | 15 | 10 | 4 | M5 | 676 | 8 | |||||||||||
12 | -0.006 -0.017 | 13 | 15 | 16 | 5 | ||||||||||||||
13 | 15 | 16 | 22 | 5.5 | M8 | 2803 | 12 | ||||||||||||
16 | 20 | 25 | 5 | 7 | |||||||||||||||
20 | -0.007 -0.020 | 25 | 30 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JP GJP BJP SJP CJP | BTA (Round) BTD (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | 3 | 2.2 | M2 | - | 3 |
6 | 6.50~10.00 | 8 | 3 | M3 | 147 | 5 | |||||
6T | 6.50~10.00 | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 15 | 4 | 3.5 | M5 | 676 | 8 | |||
8T | 9.00~13.00 | M4 | 333 | 6 | |||||||
10 | 11.00~15.00 | 10 | 4 | M5 | 676 | 8 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | ||||||||
13 | 14.00~18.00 | 22 | 5.5 | M8 | 2803 | 12 | |||||
16 | 17.00~25.00 | 5 | 7 | ||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque N•cm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FP GFP SFP HFP CFP | BTA (Round) BTD (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~12.0 | 3 | 2.2 | M2 | - | 3 |
6 | 6.50~10.00 | 6(9)~12 | 3 | M3 | 147 | 5 | |||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | 4 | 3.5 | M5 | 676 | 8 | ||
8T | 6(12)~16 | M4 | 333 | 6 | |||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | 4 | M5 | 676 | 8 | ||||
10T | 6(12)~16 | M4 | 333 | 6 | |||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | M5 | 676 | 8 | |||
12T | 8(12)~18 | M4 | 333 | 6 | |||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | 5.5 | M8 | 2803 | 10 | ||||
13T | 8(14)~20 | M6 | 1156 | 9 | |||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 5 | 7 | M8 | 2803 | 12 | |||
16T | 10(14)~24 | M6 | 1156 | 9 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |