We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
BJPBTA10-[11-15/0.01]
Description
Large Head/Round/Tapped/P Standard
Stock availability:
On request
If you are inspecting MISUMI BJPBTA10-[11-15/0.01], reach FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and individual attention to each orderer. We understand everyone, who worked with us - so, our regular clients procure the most beneficial purchase forms and discounts on the factory-made equipment market. At present, there are more than 3500 such consumers, and we constantly sign new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Jamaica, Colombia, Papua New Guinea, Tonga, Japan, Serbia, Kyrgyzstan, Morocco, Belarus, Bangladesh, Egypt, Indonesia, Hungary, Suriname, Iceland, Kiribati, Eswatini, Djibouti, Finland, China, Costa Rica, Ghana, Mozambique, Comoros, Sierra Leone, Qatar, Greece, Latvia, Croatia, Togo, Cape Verde, Kenya, El Salvador, Libya, Georgia, Macedonia, Uruguay, Vietnam, Tanzania, Swaziland, Haiti. A well-built logistics chains and a partnership network guide us to conduct our products anywhere in the planet immediately without undermining product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the field of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, get in touch with us or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | BTB (Round) DTB (Diamond) | JP | BTA (Round) BTD (Diamond) | FP | BTA (Round) BTD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | - | BJP (Round only) | - | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | - | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | P | - | L | - | B | |||||
- | ||||||||||
Type | Shape | D | ||||||||
JP | BTB | 6 | - | 8 | ||||||
JP | BTA | 10 | - | 12.10 | ||||||
FP | BTA | 10 | - | P11.01 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||||||||||
JP GJP SJP HJP CJP | BTB (Round) DTB (Diamond) | 6 | -0.004 -0.012 | 8 | 10 | 10 | 8 | 3 | 3 | M3 | 147 | 5 | |||||||
6T | 8 | 10 | M2.6 | - | 4 | ||||||||||||||
8 | -0.005 -0.014 | 10 | 12 | 13 | 15 | 4 | 3.5 | M5 | 676 | 8 | |||||||||
8T | 10 | 12 | 13 | M4 | 333 | 6 | |||||||||||||
10 | 12 | 13 | 15 | 10 | 4 | M5 | 676 | 8 | |||||||||||
12 | -0.006 -0.017 | 13 | 15 | 16 | 5 | ||||||||||||||
13 | 15 | 16 | 22 | 5.5 | M8 | 2803 | 12 | ||||||||||||
16 | 20 | 25 | 5 | 7 | |||||||||||||||
20 | -0.007 -0.020 | 25 | 30 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JP GJP BJP SJP CJP | BTA (Round) BTD (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | 3 | 2.2 | M2 | - | 3 |
6 | 6.50~10.00 | 8 | 3 | M3 | 147 | 5 | |||||
6T | 6.50~10.00 | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 15 | 4 | 3.5 | M5 | 676 | 8 | |||
8T | 9.00~13.00 | M4 | 333 | 6 | |||||||
10 | 11.00~15.00 | 10 | 4 | M5 | 676 | 8 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | ||||||||
13 | 14.00~18.00 | 22 | 5.5 | M8 | 2803 | 12 | |||||
16 | 17.00~25.00 | 5 | 7 | ||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque N•cm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FP GFP SFP HFP CFP | BTA (Round) BTD (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~12.0 | 3 | 2.2 | M2 | - | 3 |
6 | 6.50~10.00 | 6(9)~12 | 3 | M3 | 147 | 5 | |||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | 4 | 3.5 | M5 | 676 | 8 | ||
8T | 6(12)~16 | M4 | 333 | 6 | |||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | 4 | M5 | 676 | 8 | ||||
10T | 6(12)~16 | M4 | 333 | 6 | |||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | M5 | 676 | 8 | |||
12T | 8(12)~18 | M4 | 333 | 6 | |||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | 5.5 | M8 | 2803 | 10 | ||||
13T | 8(14)~20 | M6 | 1156 | 9 | |||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 5 | 7 | M8 | 2803 | 12 | |||
16T | 10(14)~24 | M6 | 1156 | 9 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |