We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPQSPA10-[1-2/0.01]
Description
Spherical Small Head/Standard/P Configurable
Stock availability:
On request
If you are pursuing MISUMI JPQSPA10-[1-2/0.01], communicate with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each purchaser. We esteem everyone, who cooperated with us - so, our regular buyers procure the most beneficial purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such clients, and we constantly compose new agreements. More than 600 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Denmark, Bahamas, Azerbaijan, Canada, Chile, The Gambia, United States, Swaziland, Cape Verde, Ghana, Estonia, Luxembourg, Indonesia, China, United Arab Emirates, Greece, Rwanda, Guatemala, Monaco, Ireland, Malaysia, Uzbekistan, Guyana, Philippines, Nigeria, Poland, Qatar, Pakistan, New Zealand, East Timor, Sweden, Armenia, Yemen, Tajikistan, Haiti, Libya, Angola, Antigua and Barbuda, Mexico, Dominica. A well-developed logistics network and a partnership network assist us to deliver our products anywhere in the globe on-time without damaging product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | SB (m6) SPB (p6) | JPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | FPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ (Round only) | GFPQ | ||||
EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQ | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQ | CFPQ | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPQ | SA | 4 | - | 2.01 | ||||||
FPQ | SA | 4 | - | P2.01 | - | L6 | - | B5.5 |
Part Number | P Selection | L | B | C | ||||||||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||||||
m6 | p6 | |||||||||||||
JPQ SJPQ | SB (m6) SPB (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1 | 1.5 | 4 | 2 | 0.3 | 0 | ||||
3 | 2 | 5 | 3 | 0.5 | 1 | |||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 1 | |||||||||
5 | 2 | 3 | 4 | 10 | 5 | |||||||||
6 | 2 | 3 | 4 | 5 |
Part Number | P 0.01mm Increment | L | B | C | (W) | |||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
m6 | p6 | |||||||||
JPQ GJPQ SJPQ CJPQ (Buff Finished) MJPQ Applicable when D5 and P5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 4 | 2 | 0.3 | 0 | - |
3 | 1.00~3.00 | 5 | 3 | 0.5 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 1 | 1.0 | |||||
5 | 2.00~5.00 | 10 | 5 | 1.2 | ||||||
6 | 2.00~6.00 | 1.5 | ||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 15 | 6 | 1.5 | 2 | 1.8 | ||
10 | 3.00~10.00 | 8 | 2 | 2.2 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 2.5 | ||||||
13 | 6.00~13.00 | 22 | 3 | |||||||
16 | 10.00~16.00 | 10 | 3 | 4 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | (W) | |||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
m6 | p6 | |||||||||
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ Applicable when D5 and P5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 2~4 | 2.0~10.0 | 0.3 | 0 | - |
3 | 1.00~3.00 | 3~6 | 2.0~10.0 | 0.5 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 2.0~10.0 | 1 | 1.0 | |||
5 | 2.00~5.00 | 5~10 | 2.0~10.0 | 1.2 | ||||||
6 | 2.00~6.00 | 6~12 | 2.0~12.0 | 1.5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 2.0~15.0 | 1.5 | 2 | 1.8 | ||
10 | 3.00~10.00 | 10~20 | 3.0~20.0 | 2 | 2.2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | ||||
13 | 6.00~13.00 | 13~26 | 5.0~20.0 | 3 | ||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 3 | 4 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 |