We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPQSB6-2
Description
Spherical Small Head/Standard/P Configurable
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for MISUMI JPQSB6-2, connect FAMAGA, the world's principle retailer of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are outlined in the quality of spare parts and special attention to each consumer. We respect everyone, who worked with us - thus, our regular consumers procure the most helpful purchase forms and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Djibouti, Cambodia, Cuba, Bhutan, Jamaica, Liberia, Comoros, Andorra, Israel, Uganda, Lithuania, Nepal, Greece, Mali, New Zealand, Zambia, India, Egypt, Chad, Latvia, Kyrgyzstan, Belize, Rwanda, Kenya, Angola, Jordan, Tanzania, Pakistan, Ghana, Guyana, Ukraine, Slovakia, Costa Rica, Azerbaijan, Iraq, Samoa, Central African Republic, Philippines, Tunisia, Brunei, Tonga, Cyprus, Turkey, Sierra Leone. A advanced logistics chains and a partnership network allow us to deliver our units anywhere in the world on-time without discrediting product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or place an order, get in touch with us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
| Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
| EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | SB (m6) SPB (p6) | JPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | FPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | |
| EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ (Round only) | GFPQ | ||||
| EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
| EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQ | ||||
| EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQ | CFPQ | ||||
| EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ |
| Part Number | - | P | - | L | - | B | ||||
| Type | Shape | D | ||||||||
| JPQ | SA | 4 | - | 2.01 | ||||||
| FPQ | SA | 4 | - | P2.01 | - | L6 | - | B5.5 |
| Part Number | P Selection | L | B | C | ||||||||||
| Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||||||
| m6 | p6 | |||||||||||||
| JPQ SJPQ | SB (m6) SPB (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1 | 1.5 | 4 | 2 | 0.3 | 0 | ||||
| 3 | 2 | 5 | 3 | 0.5 | 1 | |||||||||
| 4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 1 | |||||||||
| 5 | 2 | 3 | 4 | 10 | 5 | |||||||||
| 6 | 2 | 3 | 4 | 5 |
| Part Number | P 0.01mm Increment | L | B | C | (W) | |||||
| Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
| m6 | p6 | |||||||||
| JPQ GJPQ SJPQ CJPQ (Buff Finished) MJPQ Applicable when D5 and P5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 4 | 2 | 0.3 | 0 | - |
| 3 | 1.00~3.00 | 5 | 3 | 0.5 | 1 | |||||
| 4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 1 | 1.0 | |||||
| 5 | 2.00~5.00 | 10 | 5 | 1.2 | ||||||
| 6 | 2.00~6.00 | 1.5 | ||||||||
| 8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 15 | 6 | 1.5 | 2 | 1.8 | ||
| 10 | 3.00~10.00 | 8 | 2 | 2.2 | ||||||
| 12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 2.5 | ||||||
| 13 | 6.00~13.00 | 22 | 3 | |||||||
| 16 | 10.00~16.00 | 10 | 3 | 4 | ||||||
| 20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 5 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | (W) | |||||
| Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
| m6 | p6 | |||||||||
| FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ Applicable when D5 and P5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 2~4 | 2.0~10.0 | 0.3 | 0 | - |
| 3 | 1.00~3.00 | 3~6 | 2.0~10.0 | 0.5 | 1 | |||||
| 4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 2.0~10.0 | 1 | 1.0 | |||
| 5 | 2.00~5.00 | 5~10 | 2.0~10.0 | 1.2 | ||||||
| 6 | 2.00~6.00 | 6~12 | 2.0~12.0 | 1.5 | ||||||
| 8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 2.0~15.0 | 1.5 | 2 | 1.8 | ||
| 10 | 3.00~10.00 | 10~20 | 3.0~20.0 | 2 | 2.2 | |||||
| 12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | ||||
| 13 | 6.00~13.00 | 13~26 | 5.0~20.0 | 3 | ||||||
| 16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 3 | 4 | |||||
| 20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 |
