We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing MISUMI CFPUDT13, communicate with FAMAGA, the world's dominant retailer of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are symbolized in the quality of merchandises and special attention to each consumer. We understand everyone, who collaborated with us - hence, our regular consumers accept the most beneficial purchase terms and discounts on the industrial equipment market. At this time, there are more than 3500 such buyers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, New Zealand, Bolivia, Albania, Bangladesh, Brunei, Uzbekistan, Honduras, Djibouti, Georgia, Argentina, Pakistan, Fiji, Antigua and Barbuda, Niger, Greece, East Timor, Belarus, Romania, South Korea, Sweden, Togo, Turkmenistan, Monaco, Mauritania, Suriname, Afghanistan, Mexico, Turkey, Zimbabwe, Andorra, United States, Morocco, Botswana, Indonesia, Algeria, Angola, Jordan, Mauritius, Croatia, Zambia, Samoa, Cyprus, Burkina Faso, Libya, Serbia, Kyrgyzstan. A well-shaped logistics system and a partnership network assist us to dispatch our items anywhere in the world promptly without disreputing product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To get some advice or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Press Fit | Tapped | Threaded | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | FPJ | FPU | FPN | AT (Round) DT (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GFPJ | GFPU | GFPN | ||
EN 1.4301 Equiv. | - | - | SFPJ | SFPU | SFPN | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HFPJ (Round only) | - | HFPN | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CFPJ | CFPU | CFPN |
Part Number | - | P | - | L | - | B | - | T | ||||
Type | Shape | D | ||||||||||
FPJ | AT | 10 | - | P8.03 | - | L10 | - | B4.0 | - | T5.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | C | m | (W) | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance m6 | FPJAT | GFPJAT | SFPJAT | HFPJAT | CFPJAT | FPJDT | GFPJDT | SFPJDT | HFPJDT | CFPJDT | ||||||||
FPJ GFPJ SFPJ HFPJ CFPJ | AT (Round) DT (Diamond) | 2 | +0.008 +0.002 | 1.00~2.00 | 2~4 | 2.0~10.0 | 1.0~10.0 | 7 | 0.5 | 0.5 | - | - | - | - | - | - | |||||
3 | 2.00~4.00 | 3~6 | 2.0~10.0 | 8 | 1 | 1.0 | - | ||||||||||||||
4 | +0.012 +0.004 | 2.00~5.00 | 4~8 | 2.0~10.0 | 9 | 1 | 1.2 | - | |||||||||||||
5 | 3.00~6.00 | 5~10 | 2.0~10.0 | 10 | 2 | 1.5 | - | ||||||||||||||
6 | 4.00~7.00 | 6~12 | 2.0~12.0 | 11 | 1.8 | - | |||||||||||||||
8 | +0.015 +0.006 | 5.00~9.00 | 8~16 | 2.0~15.0 | 13 | 1.5 | 3 | 2.2 | - | ||||||||||||
10 | 7.00~11.00 | 10~20 | 3.0~20.0 | 15 | 2 | 3 | - | ||||||||||||||
12 | +0.018 +0.007 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | - | ||||||||||||||
13 | 8.00~13.00 | 13~26 | 5.0~20.0 | 18 | 4 | 3.5 | - | ||||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 3 | 4 | - | ||||||||||||||
20 | +0.021 +0.008 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | - |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | m | (W) | M Coarse | * Tightening N • cm | Unit Price Round Shape | Unit Price Diamond Shape | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPUAT | GFPUAT | SFPUAT | HFPUAT | CFPUAT | FPUDT | GFPUDT | SFPUDT | HFPUDT | CFPUDT | ||||||||||
FPU GFPU SFPU CFPU | AT (Round) DT (Diamond) | 5 | -0.004 -0.012 | 3.00~6.00 | 7~10 | 2.0~10.0 | 1.0~10.0 | 10 | 2 | 1.5 | M2 | - | 3 | - | - | ||||||||
6 | 4.00~7.00 | 6(9)~12 | 11 | 1.8 | M3 | 147 | 5 | - | - | ||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 8(12)~16 | 2.0~12.0 | 13 | 3 | 2.2 | M5 | 676 | 8 | - | - | |||||||||||
10 | 7.00~11.00 | 10(12)~20 | 2.0~15.0 | 15 | 3 | - | - | ||||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | - | - | |||||||||||||||
13 | 8.00~13.00 | 13(14)~26 | 3.0~20.0 | 18 | 4 | 3.5 | M8 | 2803 | 10 | - | - | ||||||||||||
16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 4 | 12 | - | - | |||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | - | - |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | T 0.5mm Increment | H | m | (W) | * Tightening N • cm | Unit Price Round Shape | Unit Price Diamond Shape | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | FPNAT | GFPNAT | SFPNAT | HFPNAT | CFPNAT | FPNDT | GFPNDT | SFPNDT | HFPNDT | CFPNDT | ||||||||
FPN GFPN SFPN HFPN CFPN | AT (Round) DT (Diamond) | 3 | -0.002 -0.008 | 2.00~4.00 | 2~6 | 2.0~10.0 | 1.0~10.0 | 8 | 1 | 1.0 | 147 | ||||||||||
4 | -0.004 -0.012 | 2.00~5.00 | 2~8 | 2.0~10.0 | 9 | 1.2 | 333 | ||||||||||||||
5 | 3.00~6.00 | 3~10 | 2.0~10.0 | 10 | 2 | 1.5 | 676 | ||||||||||||||
6 | 4.00~7.00 | 3~10 | 2.0~12.0 | 11 | 1.8 | 1156 | |||||||||||||||
8 | -0.005 -0.014 | 5.00~9.00 | 5~10 | 2.0~15.0 | 13 | 3 | 2.2 | 2803 | |||||||||||||
10 | 7.00~11.00 | 5~15 | 3.0~20.0 | 15 | 3 | 5557 | |||||||||||||||
12 | -0.006 -0.017 | 7.00~12.00 | 8~15 | 3.0~20.0 | 17 | 3.2 | 9702 | ||||||||||||||
16 | 13.00~16.00 | 8~20 | 5.0~20.0 | 21 | 4 | 4 | 24108 | ||||||||||||||
20 | -0.007 -0.020 | 16.00~20.00 | 10~20 | 5.0~20.0 | 25 | 5 | 5.5 | 46942 |