We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPSTD16T-P[10-16/0.01]-L[14-24/1]-B[5-20/0.1]
Description
Small Head/Tapped/P Configurable
Stock availability:
On request
If you are questing MISUMI FPSTD16T-P[10-16/0.01]-L[14-24/1]-B[5-20/0.1], call FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are illustrated in the quality of products and individual attention to each buyer. We admire everyone, who liased with us - hence, our regular customers procure the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such buyers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Sierra Leone, Burma, Colombia, Uganda, Guinea, Tanzania, Lebanon, Russia, France, Ecuador, Kiribati, Brazil, Jamaica, Luxembourg, Finland, Libya, Antigua and Barbuda, Bangladesh, Liechtenstein, Lithuania, Gambia, Bulgaria, Madagascar, Equatorial Guinea, Malaysia, Argentina, New Zealand, Tonga, Moldova, Azerbaijan, North Korea, Qatar, Burundi, Brunei, Macedonia, Belarus, Mongolia, Thailand, Rwanda, Dominica. A well-shaped logistics link and a partnership network assist us to ship our units anywhere in the planet with no delay without damaging product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this quantity is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are glad to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To consult or book, call us by phone or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPS | TB (Round) | JPS | TA (Round) TD (Diamond) | FPS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPS | GFPS | ||||
EN 1.4301 Equiv.* | - | - | SJPS | SJPS | SFPS | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | - | HFPS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPS | - | CFPS |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPS | TA | 6 | - | P4.50 | ||||||
FPS | TA | 10 | - | P8.52 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | M (Coarse) | * Tightening Torque Ncm | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||
JPS SJPS CJPS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | 2 | M3 | 147 | 5 | |||||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | 3 | M5 | 676 | 8 | |||||||||
10 | 7 | 8 | 9 | 10 | 8 | |||||||||||||
12 | -0.006 -0.017 | 8 | 9 | 10 | 11 | 12 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque Ncm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPS GJPS SJPS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 10 | 5 | 2 | 1.2 | M2 | - | 3 |
6 | 4.00~6.00 | 1.5 | M3 | 147 | 5 | ||||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 6.00~8.00 | 15 | 6 | 3 | 1.8 | M5 | 676 | 8 | ||
8T | M4 | 333 | 6 | ||||||||
10 | 7.00~10.00 | 8 | 2.2 | M5 | 676 | 8 | |||||
12 | -0.006 -0.017 | 7.00~12.00 | 2.5 | ||||||||
13 | 8.00~13.00 | 22 | 4 | 3 | M8 | 2803 | 12 | ||||
16 | 10.00~16.00 | 10 | 4 | ||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque Ncm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPS GFPS SFPS HFPS CFPS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | 2 | 1.2 | M2 | - | 3 |
6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | 1.5 | M3 | 147 | 5 | ||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | 3 | 1.8 | M5 | 676 | 8 | ||
8T | M4 | 333 | 6 | ||||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | 2.2 | M5 | 676 | 8 | ||||
10T | 8(12)~16 | M4 | 333 | 6 | |||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | M5 | 676 | 8 | |||
12T | 8(12)~18 | M4 | 333 | 6 | |||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | 4 | 3 | M8 | 2803 | 10 | |||
13T | 10(14)~20 | M6 | 1156 | 9 | |||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 4 | M8 | 2803 | 12 | ||||
16T | 10(14)~24 | M6 | 1156 | 9 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |