We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPSTA20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]
Description
Small Head/Tapped/P Configurable
Stock availability:
On request
If you are pursuing MISUMI FPSTA20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1], catch up with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each buyer. We cherish everyone, who liased with us - hence, our regular consumers procure the most helpful purchase forms and discounts on the factory-made equipment market. Now, there are more than 4500 such purchasers, and we constantly form new agreements. More than 700 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Portugal, Liberia, Bosnia and Herzegovina, Gambia, Armenia, Chad, Congo, Croatia, Bhutan, Malta, Colombia, Zambia, Kyrgyzstan, United Arab Emirates, Botswana, Guatemala, Senegal, Denmark, Netherlands, Malawi, Tunisia, Niger, Burundi, Uruguay, Morocco, Turkmenistan, Bolivia, Israel, Algeria, Ukraine, Rwanda, Cameroon, Kenya, Togo, Tonga, Sweden, Laos, Mexico, Argentina, Bangladesh, Ghana, Tajikistan. A well-built logistics network and a partnership network guide us to ship our elements anywhere in the globe with no delay without compromising product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.
To inquire or book, contact us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPS | TB (Round) | JPS | TA (Round) TD (Diamond) | FPS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPS | GFPS | ||||
EN 1.4301 Equiv.* | - | - | SJPS | SJPS | SFPS | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | - | HFPS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPS | - | CFPS |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPS | TA | 6 | - | P4.50 | ||||||
FPS | TA | 10 | - | P8.52 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | M (Coarse) | * Tightening Torque Ncm | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||
JPS SJPS CJPS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | 2 | M3 | 147 | 5 | |||||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | 3 | M5 | 676 | 8 | |||||||||
10 | 7 | 8 | 9 | 10 | 8 | |||||||||||||
12 | -0.006 -0.017 | 8 | 9 | 10 | 11 | 12 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque Ncm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPS GJPS SJPS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 10 | 5 | 2 | 1.2 | M2 | - | 3 |
6 | 4.00~6.00 | 1.5 | M3 | 147 | 5 | ||||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 6.00~8.00 | 15 | 6 | 3 | 1.8 | M5 | 676 | 8 | ||
8T | M4 | 333 | 6 | ||||||||
10 | 7.00~10.00 | 8 | 2.2 | M5 | 676 | 8 | |||||
12 | -0.006 -0.017 | 7.00~12.00 | 2.5 | ||||||||
13 | 8.00~13.00 | 22 | 4 | 3 | M8 | 2803 | 12 | ||||
16 | 10.00~16.00 | 10 | 4 | ||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque Ncm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPS GFPS SFPS HFPS CFPS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | 2 | 1.2 | M2 | - | 3 |
6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | 1.5 | M3 | 147 | 5 | ||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | 3 | 1.8 | M5 | 676 | 8 | ||
8T | M4 | 333 | 6 | ||||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | 2.2 | M5 | 676 | 8 | ||||
10T | 8(12)~16 | M4 | 333 | 6 | |||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | M5 | 676 | 8 | |||
12T | 8(12)~18 | M4 | 333 | 6 | |||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | 4 | 3 | M8 | 2803 | 10 | |||
13T | 10(14)~20 | M6 | 1156 | 9 | |||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 4 | M8 | 2803 | 12 | ||||
16T | 10(14)~24 | M6 | 1156 | 9 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |