We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CJPSTD8T-P[6-8/0.01]
Description
Small Head/Tapped/P Configurable
Stock availability:
On request
If you are inspecting MISUMI CJPSTD8T-P[6-8/0.01], reach FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of products and particular attention to each user. We praise everyone, who collaborated with us - so, our regular purchasers get the most beneficial purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Slovenia, Fiji, Dominican Republic, South Sudan, Albania, Nicaragua, Colombia, Eswatini, Japan, Panama, Papua New Guinea, Grenada, Benin, Afghanistan, Macedonia, Niger, Israel, Morocco, Bolivia, The Bahamas, Qatar, South Korea, Mauritius, Bangladesh, El Salvador, Armenia, Comoros, Turkmenistan, Estonia, Mexico, Cyprus, Cape Verde, Nigeria, Vietnam, Equatorial Guinea, Botswana, Bulgaria, Mauritania, Zimbabwe, Philippines, Swaziland, Croatia. A well-shaped logistics chains and a partnership network let us to deliver our goods anywhere in the globe with no delay without disreputing product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this amount is ascending every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or make a request, call us by phone or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPS | TB (Round) | JPS | TA (Round) TD (Diamond) | FPS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPS | GFPS | ||||
EN 1.4301 Equiv.* | - | - | SJPS | SJPS | SFPS | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | - | HFPS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPS | - | CFPS |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPS | TA | 6 | - | P4.50 | ||||||
FPS | TA | 10 | - | P8.52 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | M (Coarse) | * Tightening Torque Ncm | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||
JPS SJPS CJPS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | 2 | M3 | 147 | 5 | |||||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | 3 | M5 | 676 | 8 | |||||||||
10 | 7 | 8 | 9 | 10 | 8 | |||||||||||||
12 | -0.006 -0.017 | 8 | 9 | 10 | 11 | 12 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque Ncm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPS GJPS SJPS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 10 | 5 | 2 | 1.2 | M2 | - | 3 |
6 | 4.00~6.00 | 1.5 | M3 | 147 | 5 | ||||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 6.00~8.00 | 15 | 6 | 3 | 1.8 | M5 | 676 | 8 | ||
8T | M4 | 333 | 6 | ||||||||
10 | 7.00~10.00 | 8 | 2.2 | M5 | 676 | 8 | |||||
12 | -0.006 -0.017 | 7.00~12.00 | 2.5 | ||||||||
13 | 8.00~13.00 | 22 | 4 | 3 | M8 | 2803 | 12 | ||||
16 | 10.00~16.00 | 10 | 4 | ||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque Ncm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPS GFPS SFPS HFPS CFPS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | 2 | 1.2 | M2 | - | 3 |
6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | 1.5 | M3 | 147 | 5 | ||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | 3 | 1.8 | M5 | 676 | 8 | ||
8T | M4 | 333 | 6 | ||||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | 2.2 | M5 | 676 | 8 | ||||
10T | 8(12)~16 | M4 | 333 | 6 | |||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | M5 | 676 | 8 | |||
12T | 8(12)~18 | M4 | 333 | 6 | |||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | 4 | 3 | M8 | 2803 | 10 | |||
13T | 10(14)~20 | M6 | 1156 | 9 | |||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 4 | M8 | 2803 | 12 | ||||
16T | 10(14)~24 | M6 | 1156 | 9 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |