We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CFPSTA20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]
Description
Small Head/Tapped/P Configurable
Stock availability:
On request
If you are looking for MISUMI CFPSTA20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1], communicate with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of goods and personalseparate attention to each buyer. We value everyone, who liased with us - so, our regular buyers procure the most attractive purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Finland, Croatia, Samoa, Nepal, Belize, Albania, Kyrgyzstan, Estonia, Poland, Cyprus, Macedonia, Syria, Eritrea, Kazakhstan, Azerbaijan, Algeria, United Arab Emirates, Oman, Tunisia, Mexico, Burkina Faso, Netherlands, Cameroon, Philippines, Botswana, Bulgaria, Russia, Laos, Brunei, Jordan, South Korea, Indonesia, Senegal, Seychelles, Serbia, Dominica, Panama, Switzerland, Zimbabwe, Pakistan, Egypt, Togo, Mauritania. A well-elaborated logistics network and a partnership network guide us to dispatch our elements anywhere in the world with no delay without undermining product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPS | TB (Round) | JPS | TA (Round) TD (Diamond) | FPS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPS | GFPS | ||||
EN 1.4301 Equiv.* | - | - | SJPS | SJPS | SFPS | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | - | HFPS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPS | - | CFPS |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPS | TA | 6 | - | P4.50 | ||||||
FPS | TA | 10 | - | P8.52 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | M (Coarse) | * Tightening Torque Ncm | ||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||
JPS SJPS CJPS | TB (Round) | 6 | -0.004 -0.012 | 4 | 5 | 10 | 5 | 2 | M3 | 147 | 5 | |||||||
8 | -0.005 -0.014 | 6 | 7 | 15 | 6 | 3 | M5 | 676 | 8 | |||||||||
10 | 7 | 8 | 9 | 10 | 8 | |||||||||||||
12 | -0.006 -0.017 | 8 | 9 | 10 | 11 | 12 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque Ncm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPS GJPS SJPS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 10 | 5 | 2 | 1.2 | M2 | - | 3 |
6 | 4.00~6.00 | 1.5 | M3 | 147 | 5 | ||||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 6.00~8.00 | 15 | 6 | 3 | 1.8 | M5 | 676 | 8 | ||
8T | M4 | 333 | 6 | ||||||||
10 | 7.00~10.00 | 8 | 2.2 | M5 | 676 | 8 | |||||
12 | -0.006 -0.017 | 7.00~12.00 | 2.5 | ||||||||
13 | 8.00~13.00 | 22 | 4 | 3 | M8 | 2803 | 12 | ||||
16 | 10.00~16.00 | 10 | 4 | ||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque Ncm | ||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPS GFPS SFPS HFPS CFPS | TA (Round) TD (Diamond) | 5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | 2 | 1.2 | M2 | - | 3 |
6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | 1.5 | M3 | 147 | 5 | ||||
6T | M2.6 | - | 4 | ||||||||
8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | 3 | 1.8 | M5 | 676 | 8 | ||
8T | M4 | 333 | 6 | ||||||||
10 | 7.00~10.00 | 11(12)~20 | 3.0~20.0 | 2.2 | M5 | 676 | 8 | ||||
10T | 8(12)~16 | M4 | 333 | 6 | |||||||
12 | -0.006 -0.017 | 7.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | M5 | 676 | 8 | |||
12T | 8(12)~18 | M4 | 333 | 6 | |||||||
13 | 8.00~13.00 | 13(14)~26 | 5.0~20.0 | 4 | 3 | M8 | 2803 | 10 | |||
13T | 10(14)~20 | M6 | 1156 | 9 | |||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 4 | M8 | 2803 | 12 | ||||
16T | 10(14)~24 | M6 | 1156 | 9 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | 9 |