We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ANKS8-50
Description
Adjusting Stopper Screws with Knurled Knob/Fine Thread
Stock availability:
On request
If you are pursuing MISUMI ANKS8-50, catch up with FAMAGA, the world's principle retailer of factory-made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of products and individual attention to each buyer. We esteem everyone, who cooperated with us - so, our regular buyers bring in the most favorable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4500 such clients, and we constantly arrange new agreements. More than 600 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Brunei, New Zealand, Poland, Portugal, Panama, Croatia, Montenegro, Liberia, Honduras, The Gambia, Lithuania, El Salvador, Mauritius, Canada, Serbia, Philippines, Ukraine, Swaziland, Argentina, Dominica, Peru, Andorra, Vietnam, Guatemala, Japan, Mozambique, Finland, Iceland, Pakistan, Seychelles, Switzerland, Angola, Ireland, Equatorial Guinea, Rwanda, Morocco, Costa Rica, East Timor, Estonia, Ghana, Suriname, Latvia, Togo, Botswana, Djibouti, Comoros. A well-developed logistics bond and a partnership network assist us to conduct our goods anywhere in the earth promptly without damaging product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is rising every day. We are happy that consumers choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as to stay on the top.
To request or place an order, get in touch with us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Adjusting Stopper | Type | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | |
Material | Surface Treatment | |||||
Fine | ANKSB | EN 1.7220 Equiv. | 40~45HRC | Black Oxide | EN 1.0038 Equiv. | Trivalent Chromate |
ANKSM | Electroless Nickel Plating | |||||
ANKSS | EN 1.4006 Equiv. | - | EN 1.4301 Equiv. | - | ||
Coarse | ANKB | EN 1.7220 Equiv. | Black Oxide | EN 1.0038 Equiv. | Trivalent Chromate | |
ANKM | Electroless Nickel Plating | |||||
ANKS | EN 1.4006 Equiv. | - | EN 1.4301 Equiv. | - |
Part Number | - | L |
ANKB6 | - | 20 |
Part Number | L Selection | MxPitch | B1 | B2 | A | 1 | SR | B | (C) | T | Unit Price | |||||||||||||
ANKSB ANKB | ANKSM ANKM | ANKSS ANKS | ||||||||||||||||||||||
Type | M | Fine | Coarse | |||||||||||||||||||||
(Fine) ANKSB ANKSM ANKSS | (Coarse) ANKB ANKM ANKS | 3 | 15 | 20 | 25 | 3x0.35 | 3x0.5 | 10 | 2 | 7 | 2 | 1.6 | 3 | 5.5 | 6.4 | 2.4 | ||||||||
4 | 15 | 20 | 25 | 4x0.5 | 4x0.7 | 10 | 2.5 | 7 | 2.5 | 1.6 | 4 | 7 | 8.1 | 3.2 | ||||||||||
5 | 20 | 25 | 30 | 40 | 5x0.5 | 5x0.8 | 15 | 3 | 15 | 3 | 2 | 5 | 8 | 9.2 | 4 | |||||||||
6 | 20 | 25 | 30 | 40 | 6x0.75 | 6x1.0 | 15 | 4 | 15 | 4 | 2 | 6 | 10 | 11.5 | 5 | |||||||||
8 | 30 | 40 | 50 | 60 | 8x0.75 | 8x1.25 | 15 | 5 | 15 | 5 | 2.5 | 8 | 13 | 15 | 6.5 | |||||||||
10 | 30 | 40 | 50 | 60 | 10x1.0 | 10x1.5 | 20 | 6 | 25 | 5 | 3 | 10 | 17 | 19.6 | 8 | |||||||||
12 | 40 | 50 | 60 | 80 | 12x1.0 | 12x1.75 | 20 | 8 | 25 | 6 | 3 | 12 | 19 | 21.9 | 10 |