We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FWBS16-[20-800/1]-E[5-100/1]-F[0-100/1]
Description
Specified Threaded Rods - Fully Threaded similar DIN 6379
Stock availability:
On request
If you are looking for MISUMI FWBS16-[20-800/1]-E[5-100/1]-F[0-100/1], call FAMAGA, the world's principle retailer of streamlined equipment. Our company has worked for more than ten years - these are cycles of experience, which are portrayed in the quality of spare parts and special attention to each orderer. We praise everyone, who conspired with us - hence, our regular clients receive the most helpful purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4500 such customers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Bahrain, Portugal, Hungary, Kazakhstan, Madagascar, New Zealand, Malaysia, United States, Ireland, Jamaica, Ecuador, Argentina, Croatia, Niger, Antigua and Barbuda, The Bahamas, Japan, Gambia, Tonga, Slovakia, Azerbaijan, Paraguay, Mongolia, Andorra, El Salvador, Bosnia and Herzegovina, Mauritius, Senegal, Kyrgyzstan, Finland, Mexico, Cameroon, Luxembourg, Laos, Eswatini, Ghana, Costa Rica, Uruguay, Greece. A well-elaborated logistics bond and a partnership network let us to ship our products anywhere in the earth immediately without undermining product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as keep on top of it.
To get some advice or book, get in touch with us or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Surface Treatment | ||||
Studs - Fully Threaded | Both Ends Right-Hand Screws | |||||
Thread gauge class 2 is used. | Class 3 | Thread gauge class 2 is used. | ||||
Coarse | Fine | Coarse | Coarse | Fine | ||
FAB | FABP | FABM | FWB | FWBP | EN 1.1191 Equiv. | Black Oxide |
FABN | - | - | FWBN | - | Electroless Nickel Plating | |
FABS | FABSP | FABMS | FWBS | FWBSP | EN 1.4301 Equiv. | - |
Part Number | - | L | - | E | - | F |
FAB6 FWBS6 | - - | 100 100 | - | E10 | - | F10 |
M | Thread Pitch | |
Coarse | Fine | |
3 | 0.5 | - |
4 | 0.7 | - |
5 | 0.8 | 0.5 |
6 | 1 | 0.75 |
8 | 1.25 | 1 |
10 | 1.5 | 1.25 |
12 | 1.75 | 1.25 |
16 | 2 | 1.5 |
20 | 2.5 | 1.5 |
Part Number | L 1mm Increment | Unit Price | ||||||||||||||
Type | M | FAB | FABN | FABS | ||||||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | |||
(Class 2, Coarse) FAB FABN FABS | 3 | 20~150 | - | - | - | - | - | - | - | - | - | - | ||||
4 | 20~150 | - | - | - | - | - | - | - | - | - | - | |||||
5 | 20~250 | - | - | - | - | - | - | - | - | |||||||
6 | - | - | - | - | - | - | - | - | ||||||||
8 | 20~600 | - | - | - | - | - | - | |||||||||
10 | - | - | - | - | - | - | ||||||||||
12 | 20~800 | |||||||||||||||
16 | ||||||||||||||||
20 |
Part Number | L 1mm Increment | Unit Price | ||||||||||||||||||
Type | M | FABM | FABMS | FABP | FABSP | |||||||||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L20~100 | L101~200 | L201~400 | L401~600 | |||
(Class 3, Coarse) FABM FABMS (Class 2, Fine) FABP FABSP | 4 | 20~150 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||
5 | 20~250 | - | - | - | - | - | - | |||||||||||||
6 | - | - | - | - | - | - | ||||||||||||||
8 | 20~600 (400) | - | - | - | - | |||||||||||||||
10 | - | - | - | - | ||||||||||||||||
12 | 20~800 | |||||||||||||||||||
16 | ||||||||||||||||||||
20 |
Part Number | 1mm Increment | Unit Price | |||||||||||||||||
Type | M | L | E | F | FWB | FWBN | FWBS | ||||||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | |||||
(Class 2, Coarse) FWB FWBN FWBS | 3 | 20~100 | 5~15 | 0~15 | - | - | - | - | - | - | - | - | - | - | - | - | |||
4 | 20~150 | 5~100 | 0~100 | - | - | - | - | - | - | - | - | - | |||||||
5 | 20~250 | - | - | - | - | - | - | ||||||||||||
6 | - | - | - | - | - | - | |||||||||||||
8 | 20~600 | - | - | - | |||||||||||||||
10 | - | - | - | ||||||||||||||||
12 | 20~800 | ||||||||||||||||||
16 | |||||||||||||||||||
20 | |||||||||||||||||||
24 | - | - | - | - | - | ||||||||||||||
30 | - | - | - | - | - | ||||||||||||||
EMx5 FMx5 When F=0, threads are not machined on the F dimension side. |
Part Number | 1mm Increment | Unit Price | ||||||||||||
Type | M | L | E | F | FWBP | FWBSP | ||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | |||||
(Class 2, Fine) FWBP FWBSP | 5 | 20~250 | 5~100 | 0~100 | - | - | - | - | ||||||
6 | - | - | - | - | ||||||||||
8 | 20~600 | - | - | |||||||||||
10 | - | - | ||||||||||||
12 | 20~800 | |||||||||||||
16 | ||||||||||||||
20 | ||||||||||||||
EMx5 FMx5 When F=0, threads are not machined on the F dimension side. |