We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FNCLSS-V[3-90/0.5]-D[21-100/1]-L[10-100/0.1]
Description
Collars/Length +-0.10 & +-0.01 mm/Dimensions Configurable
Stock availability:
On request
If you are inspecting MISUMI FNCLSS-V[3-90/0.5]-D[21-100/1]-L[10-100/0.1], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of outcomes and particular attention to each user. We esteem everyone, who collaborated with us - so, our regular clients receive the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such customers, and we constantly make new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Venezuela, Nicaragua, Papua New Guinea, Estonia, Dominican Republic, Grenada, Haiti, Afghanistan, France, Equatorial Guinea, Jordan, India, Burundi, Serbia, Guyana, Uzbekistan, Malawi, Mauritius, Ireland, Qatar, Kenya, Mozambique, Cameroon, Sweden, Austria, Madagascar, Syria, Peru, Kazakhstan, Fiji, Kiribati, Mauritania, Indonesia, Morocco, Iran, Seychelles, Cape Verde, Yemen, Bosnia and Herzegovina, Zimbabwe, Mexico, Georgia, Jamaica. A well-developed logistics chains and a partnership network cheer us to send our units anywhere in the planet as soon as possible without discrediting product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as stay in control.
To consult or make a request, contact us or send a message to the online chat on our site. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
FNCL | FAC | EN 1.0038 Equiv. | - |
FNCLC | FACS | EN 1.1191 Equiv. | - |
FNCLB | FABSC | Black Oxide | |
FNCLM | FAMSC | Electroless Nickel Plating | |
FNCLR | FARSC | LTBC Plating | |
FNCLBB | - | Brass (JIS EN CW614N Equiv.) | - |
FNCLA | FAASC | Aluminum Alloy 2000 series | Clear Anodize |
FNCLAB | - | Black Anodize | |
FNCLSS | FSASC | EN 1.4301 Equiv. | - |
FNCLSSR | FSASCR | LTBC Plating |
Part Number | - | V | - | D | - | L |
FNCLB | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | - | V | - | D | - | L |
FAMSC | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | ||||||||
FNCL | FNCLC | FNCLB | FNCLM | FNCLR | FNCLBB | FNCLA FNCLAB | FNCLSS | FNCLSSR | ||||
FNCL FNCLC FNCLB FNCLM FNCLR FNCLBB FNCLA FNCLAB FNCLSS FNCLSSR | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | |||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | - | ||||||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
61~75 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
76~80 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | |||||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | |||||||||||
Machining Conditions *1, *2, *3 Foreign Exchange and Foreign Trade Act restricts the export of collars whose O.D. is more than 75mm and over length exceed O.D. Size D>75/L75 is discontinued. |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | |||||||
FAC | FACS | FABSC | FAMSC | FARSC | FAASC | FSASC | FSASCR | ||||
FAC FACS FABSC FAMSC FARSC FAASC FSASC FSASCR | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
61~80 (1mm Increment) | 10.0~ 25.0 | - | - | - | |||||||
25.1~ 50.0 | - | - | - | ||||||||
50.1~ 75.0 | - | - | - | ||||||||
75.1~ 100.0 | - | - | - | ||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | - | - | - | |||||||
25.1~ 50.0 | - | - | - | ||||||||
50.1~ 75.0 | - | - | - | ||||||||
75.1~ 100.0 | - | - | - | ||||||||
Machining Conditions *1, *2, *3 No specification available for sizes without declaration of value. |