We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FNCLR-V[3-90/0.5]-D[21-100/1]-L[10-100/0.1]
Description
Collars/Length +-0.10 & +-0.01 mm/Dimensions Configurable
Stock availability:
On request
If you are pursuing MISUMI FNCLR-V[3-90/0.5]-D[21-100/1]-L[10-100/0.1], communicate with FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of outcomes and special attention to each client. We esteem everyone, who conspired with us - so, our regular consumers procure the most attractive purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Bahamas, Jamaica, Eritrea, Botswana, Oman, Liechtenstein, Palestine, Canada, Nepal, Grenada, Colombia, Denmark, Greece, Andorra, United States, Georgia, Antigua and Barbuda, Azerbaijan, Netherlands, Mozambique, Djibouti, Mongolia, Brunei, Norway, Tajikistan, Iran, Suriname, Guyana, Ireland, Australia, Philippines, Lithuania, Mexico, Sweden, Haiti, Equatorial Guinea, Yemen, Pakistan, Syria, Qatar, Malaysia, Kuwait, United Arab Emirates, Vietnam. A well-shaped logistics series and a partnership network assist us to conduct our goods anywhere in the planet on-time without undermining product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this number is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, get in touch with us or write to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
FNCL | FAC | EN 1.0038 Equiv. | - |
FNCLC | FACS | EN 1.1191 Equiv. | - |
FNCLB | FABSC | Black Oxide | |
FNCLM | FAMSC | Electroless Nickel Plating | |
FNCLR | FARSC | LTBC Plating | |
FNCLBB | - | Brass (JIS EN CW614N Equiv.) | - |
FNCLA | FAASC | Aluminum Alloy 2000 series | Clear Anodize |
FNCLAB | - | Black Anodize | |
FNCLSS | FSASC | EN 1.4301 Equiv. | - |
FNCLSSR | FSASCR | LTBC Plating |
Part Number | - | V | - | D | - | L |
FNCLB | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | - | V | - | D | - | L |
FAMSC | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | ||||||||
FNCL | FNCLC | FNCLB | FNCLM | FNCLR | FNCLBB | FNCLA FNCLAB | FNCLSS | FNCLSSR | ||||
FNCL FNCLC FNCLB FNCLM FNCLR FNCLBB FNCLA FNCLAB FNCLSS FNCLSSR | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | |||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | - | ||||||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
61~75 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
76~80 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | |||||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | |||||||||||
Machining Conditions *1, *2, *3 Foreign Exchange and Foreign Trade Act restricts the export of collars whose O.D. is more than 75mm and over length exceed O.D. Size D>75/L75 is discontinued. |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | |||||||
FAC | FACS | FABSC | FAMSC | FARSC | FAASC | FSASC | FSASCR | ||||
FAC FACS FABSC FAMSC FARSC FAASC FSASC FSASCR | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
61~80 (1mm Increment) | 10.0~ 25.0 | - | - | - | |||||||
25.1~ 50.0 | - | - | - | ||||||||
50.1~ 75.0 | - | - | - | ||||||||
75.1~ 100.0 | - | - | - | ||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | - | - | - | |||||||
25.1~ 50.0 | - | - | - | ||||||||
50.1~ 75.0 | - | - | - | ||||||||
75.1~ 100.0 | - | - | - | ||||||||
Machining Conditions *1, *2, *3 No specification available for sizes without declaration of value. |