We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FNCLBB-V[3-90/0.5]-D[4-20/0.5]-L[10-100/0.1]
Description
Collars/Length +-0.10 & +-0.01 mm/Dimensions Configurable
Stock availability:
On request
If you are looking for MISUMI FNCLBB-V[3-90/0.5]-D[4-20/0.5]-L[10-100/0.1], catch up with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of outputs and personalseparate attention to each user. We admire everyone, who collaborated with us - hence, our regular buyers receive the most helpful purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such buyers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Azerbaijan, Iceland, North Korea, Ghana, Tunisia, Switzerland, Lesotho, Russia, Congo, Antigua and Barbuda, Belgium, Slovenia, Pakistan, Afghanistan, Samoa, Bulgaria, Nigeria, Estonia, Bolivia, Uganda, Slovakia, Mozambique, Chad, United States, Tonga, Liechtenstein, Uzbekistan, El Salvador, Senegal, Mongolia, Mexico, Equatorial Guinea, Tanzania, Eswatini, Burundi, Kazakhstan, Denmark, Lithuania, Zambia, Philippines, Namibia, Argentina. A advanced logistics series and a partnership network help us to conduct our units anywhere in the world immediately without undermining product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been provided, and this number is amounting every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or order, phone us or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
FNCL | FAC | EN 1.0038 Equiv. | - |
FNCLC | FACS | EN 1.1191 Equiv. | - |
FNCLB | FABSC | Black Oxide | |
FNCLM | FAMSC | Electroless Nickel Plating | |
FNCLR | FARSC | LTBC Plating | |
FNCLBB | - | Brass (JIS EN CW614N Equiv.) | - |
FNCLA | FAASC | Aluminum Alloy 2000 series | Clear Anodize |
FNCLAB | - | Black Anodize | |
FNCLSS | FSASC | EN 1.4301 Equiv. | - |
FNCLSSR | FSASCR | LTBC Plating |
Part Number | - | V | - | D | - | L |
FNCLB | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | - | V | - | D | - | L |
FAMSC | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | ||||||||
FNCL | FNCLC | FNCLB | FNCLM | FNCLR | FNCLBB | FNCLA FNCLAB | FNCLSS | FNCLSSR | ||||
FNCL FNCLC FNCLB FNCLM FNCLR FNCLBB FNCLA FNCLAB FNCLSS FNCLSSR | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | |||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | - | ||||||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
61~75 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
76~80 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | |||||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | |||||||||||
Machining Conditions *1, *2, *3 Foreign Exchange and Foreign Trade Act restricts the export of collars whose O.D. is more than 75mm and over length exceed O.D. Size D>75/L75 is discontinued. |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | |||||||
FAC | FACS | FABSC | FAMSC | FARSC | FAASC | FSASC | FSASCR | ||||
FAC FACS FABSC FAMSC FARSC FAASC FSASC FSASCR | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
61~80 (1mm Increment) | 10.0~ 25.0 | - | - | - | |||||||
25.1~ 50.0 | - | - | - | ||||||||
50.1~ 75.0 | - | - | - | ||||||||
75.1~ 100.0 | - | - | - | ||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | - | - | - | |||||||
25.1~ 50.0 | - | - | - | ||||||||
50.1~ 75.0 | - | - | - | ||||||||
75.1~ 100.0 | - | - | - | ||||||||
Machining Conditions *1, *2, *3 No specification available for sizes without declaration of value. |