We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FNCLA-V[3-90/0.5]-DA[76-100/1]-LA[76.5-100/0.1]
Description
Collars/Length +-0.10 & +-0.01 mm/Dimensions Configurable
Stock availability:
On request
If you are inspecting MISUMI FNCLA-V[3-90/0.5]-DA[76-100/1]-LA[76.5-100/0.1], catch up with FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of outputs and particular attention to each client. We cherish everyone, who worked with us - thus, our regular clients procure the most acceptable purchase terms and discounts on the manufacturing equipment market. Today, there are more than 4000 such customers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Malta, Argentina, Ukraine, New Zealand, Tanzania, Serbia, Burma, Malaysia, Eswatini, Chad, Myanmar, Netherlands, Belarus, Guinea, Nepal, Bhutan, Mauritania, Central African Republic, Namibia, Botswana, Peru, Malawi, Paraguay, Brunei, Belize, Poland, Macedonia, Cameroon, Antigua and Barbuda, Qatar, Uganda, Moldova, Kuwait, Burundi, Nigeria, Armenia, Andorra, Australia, India, Slovakia, Niger, Switzerland, Israel, Rwanda. A well-developed logistics system and a partnership network cheer us to ship our units anywhere in the world immediately without undermining product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or make a request, contact us or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
FNCL | FAC | EN 1.0038 Equiv. | - |
FNCLC | FACS | EN 1.1191 Equiv. | - |
FNCLB | FABSC | Black Oxide | |
FNCLM | FAMSC | Electroless Nickel Plating | |
FNCLR | FARSC | LTBC Plating | |
FNCLBB | - | Brass (JIS EN CW614N Equiv.) | - |
FNCLA | FAASC | Aluminum Alloy 2000 series | Clear Anodize |
FNCLAB | - | Black Anodize | |
FNCLSS | FSASC | EN 1.4301 Equiv. | - |
FNCLSSR | FSASCR | LTBC Plating |
Part Number | - | V | - | D | - | L |
FNCLB | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | - | V | - | D | - | L |
FAMSC | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | ||||||||
FNCL | FNCLC | FNCLB | FNCLM | FNCLR | FNCLBB | FNCLA FNCLAB | FNCLSS | FNCLSSR | ||||
FNCL FNCLC FNCLB FNCLM FNCLR FNCLBB FNCLA FNCLAB FNCLSS FNCLSSR | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | |||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | - | ||||||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
61~75 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
76~80 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | |||||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | |||||||||||
Machining Conditions *1, *2, *3 Foreign Exchange and Foreign Trade Act restricts the export of collars whose O.D. is more than 75mm and over length exceed O.D. Size D>75/L75 is discontinued. |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | |||||||
FAC | FACS | FABSC | FAMSC | FARSC | FAASC | FSASC | FSASCR | ||||
FAC FACS FABSC FAMSC FARSC FAASC FSASC FSASCR | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
61~80 (1mm Increment) | 10.0~ 25.0 | - | - | - | |||||||
25.1~ 50.0 | - | - | - | ||||||||
50.1~ 75.0 | - | - | - | ||||||||
75.1~ 100.0 | - | - | - | ||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | - | - | - | |||||||
25.1~ 50.0 | - | - | - | ||||||||
50.1~ 75.0 | - | - | - | ||||||||
75.1~ 100.0 | - | - | - | ||||||||
Machining Conditions *1, *2, *3 No specification available for sizes without declaration of value. |